- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D printer - Anycubic Kobra 2
A 3D printer that will appeal to both beginners and experienced 3D printing enthusiasts. The update of the popular Kobra printer from Anycubic has been improved with new, useful features . All three axes of motion have been strengthened, a completely new print head has been used, and the LeviQ auto-leveling system has been improved. These and other minor improvements make the Kobra 2 more efficient and user-friendly. It can print at speeds up to 250 mm/s , which means it is up to 5 times faster than standard 3D printers. The dimensions of the working area of the printer are 220 x 220 x 250 mm .
3D printer - Anycubic Kobra 2.
LeviQ 2.0 Auto Leveling System.
Increased speed
The Kobra 2 printer can print at a speed of up to 250 mm/s! The acceleration of 2,500 m/s 2 is also impressive. Despite such speeds, the final models retain very good quality. Reducing the working time makes the printer much more efficient and uses less energy.
LeviQ 2.0 system
The first layer determines whether the print will be successful or not. If it is done well, it is likely that the entire printout will be of good quality. For this to happen, the printer's build plate must be perfectly level. The LeviQ 2.0 system, which Kobra 2 is equipped with, measures the table at 25 measurement points using a proximity sensor and automatically adjusts the tilt of the platform . In addition, the system allows you to adjust the Z axis without manual intervention and adapt it to the user's needs.
Dual Gear Direct Drive Extruder
The efficient direct drive extruder ensures the printer works quickly and precisely. The extruder's power reaches up to 60 W, thanks to which it melts the filament extremely quickly and ensures perfect fluidity .
Optimized cooling system
The fan located in the print head can reach speeds of up to 7000 rpm! Such a fast air flow can significantly shorten the cooling process of printouts. This eliminates any warping and deformation caused by overheating.
Solid construction ensures good quality prints.
Dual Z Axis
The design of the Z axis consists of two solid screws, which translates into a more stable and precise operation. The build plate is more even and the number of print layers is reduced, resulting in excellent printing results even at high speeds. Synchronized Z-axis drive elements eliminate the risk of unwanted lines and bumps on the sides of the print.
Resistant moving parts
Kobra 2 is equipped with a metal double spindle and strong SG15 bearings. The elements are characterized by high wear resistance, so they do not have to be replaced often. Thanks to this you will save your time and money .
Other features of the Anycubic Kobra 2 3D printer
- Easy assembly in 5 steps that will take you no more than 10 minutes
- 4.3" LCD touch screen with a wide range of functions and settings
- PEI spring steel magnetic work platform
- Resume printing after a power outage
- Filament end sensor that stops printing when the filament runs out
To remove the printout from the PEI platform, simply bend it slightly.
Anycubic Kobra 2 printer technical specification
| TECHNICAL SPECIFICATIONS | |
|---|---|
| printing method: | FDM |
| Print Size: | 220x220x250mm |
| Nozzle temperature: | up to 260°C |
| table temperature: | up to 110°C |
| nozzle diameter: | standard: 0.4mm |
| Print Thickness: | from 0.05mm to 0.3mm |
| printing speed: | up to 250mm/sec |
| Supported filament: | PLA, PETG, ABS, TPU |
| Filament Diameter: | 1.75mm |
| Display: | touchscreen, 4.3" |
| Software: | Cura, Prusa Slicer |
| Operating mode: | memory card, USB C |
| File Format: | STL, OBJ |
| Supply voltage: | from 110V to 220V AC |
| Rated Power: | 400W |
| Printer dimensions: | 440 x 435 x 486mm |
| Mass: | 8.4 kg |
Useful links |
