- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Description
A set that allows you to enter into graphic programming using LabVIEW. Enables construction of 14 projects, contains RedBoard and many electronic elements. It teaches, among others, how to use sensor data, engine control and many other things. The set is also suitable for beginners because it does not require any programming knowledge or experience with electronics.
The set includes a license for the LabVIEW system for home and non-commercial use. The software works with Windows. Before installation it is recommended to familiarize yourself with thesystem requirements.
|
For details, see the manufacturer'suser guide. |
Examples of projects
- LED flashing
- Control of multiple LEDs
- LED brightness control
- RGB LED controls
- Reading button status
- Sound generation with buzzer
- Voltage measurement from the potentiometer
- Operation of the photoresistor
- TMP36 temperature sensor support
- Operation of the pressure sensor
- DC motor control
- Servomechanism control
- Sound Detector Operation
- Support for MMA8452 accelerometer
Included
The kit includes electronic components together with the LabVIEW license. A detailed list is given in the table.
| No. | Photo | Description |
|---|---|---|
| 1 |  |
RedBoard -compatible with the popular Arduino Uno module, programmed via microUSB socket. |
| 3 |  |
Activation code LabVIEW Home Bundle software - application to be downloaded fromthe manufacturer's website. |
| 4 |  |
RedBoard moduleholderand contact plate |
| 5 |  |
Contact plate 400 holes forcreating prototype systems. |
| 6 |  |
Screwdriver- for the assembly of systems. |
| 7 |  |
The sound sensoris easy to use and has the following outputs: analogue - enabling measurement of signal intensity, digital - changing state after exceeding the set level and audio output. |
| 8 |  |
Accelerometer MMA8452Q- sensor for measuring acceleration in three axes in the range: ± 2 g, ±4 g or ±8 g. It communicates via the I2C bus. |
| 9 |  |
NPN BC337- bipolar, 45 V, 0.8 A.Transistor. The output circuit is CBE. One piece is included in the set. |
| 10 |  |
Diode 1N4148- maximum operating voltage 75 V, current up to 2 A. Price for 10 pieces. In the set there is one piece. |
| 11 |  |
DC motor- a simple DC motor with an overlapping gear wheel. |
| 12 |  |
Micro-type servo- small modeling servo with movement range up to 160°. It works with voltage from 4.8 V to 6.0 V, has a torque of 1.44 kg*cm and a speed of 0.10 s/60°. |
| 13 |  |
Temperature sensor TMP36- analog thermometer in which the output voltage is proportional to the measured temperature from -40 °C to +120 °C. |
| 14 |  |
The pressure sensorreduces its resistance as the force applied to the round tip increases. Circular sensor, 13 mm in diameter. |
| 15 |  |
MiniUSB cable - toconnect the motherboard to the computer. |
| 16 |  |
Male to maleconnection cables20 cm - 30 pcs. They are used to create layouts on the contact board. |
| 17 |  |
Photoresistor- a simple, analogue light intensity sensor. |
| 18 |  |
RGB LED with a common cathode -can shine in any RGB colour. |
| 19 |  |
Set of 20 coloured LEDs: green, red, blue and yellow. |
| 20 |  |
10 kΩ rotary potentiometer -can be connected to a contact plate. |
| 21 |  |
2.048 kHz piezobuzzer- simple sound generator. |
| 22 |  |
The tact-switch button- a simple, small button. |
| 23 |  |
Resistors: 330 Ω and 10 kΩ. |
Useful links |
