Product description: Filament ABS Kevlar 1.75 mm 0.75 kg - Black
Black ABS Kevlar filament by Spectrum in the form of a fiber, wound on spools. The diameter of the material is 1.75 mm , the net weight is 0.75 kg . The product is hermetically packed with a desiccant. The mounting hole diameter is 52 mm. The product requires a heated bed to properly form prints. Due to its chemical composition, the filament allows you to obtain prints with better durability and increased tensile strength than is offered by standard ABS. The modified composition reduced the shrinkage and the material density. These features allow the creation of parts with exact dimensions and consisting of many parts.
In our offer of filaments you will also find other materials and colors.
Filament ABS Kevlar 1.75 mm 0.75 kg - Black
Features of the ABS Kevlar filament
- Industrial material
- Material enriched with aramid fibers
- Vicat softening temperature - 95 ° C
- Heat Deflection Temperature (HDT): 88 ° C
- High stiffness and impact strength
- High mechanical resistance
- Very strong layered lamination
Suggested filament printing parameters
| Printing temperature | 250 ° C to 270 ° C |
| Table temperature | 100 ° C |
| Print speed | From 30 mm / s to 70 mm / s |
| Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Color | Black |
| Printing temperature | 250 ° C to 270 ° C |
| Table temperature | 100 ° C |
| Material density | 1.05 g / cm³ |
| Spool - material | ABS Kevlar |
| Spool outer diameter | 200 mm |
| Spool width | 55 mm |
| Mounting hole diameter | 52 mm |
| Package | Cardboard with print |
| Desiccant | Yes |
| Vacuum packing | Yes |
| Spool dimensions | 200 x 52 x 55 mm |
| Net weight | 0.75 kg |
