- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D printer - Zmorph Lab with a set of accessories
3D printer by Polish manufacturer Zmorph. The device with an innovative design, has been equipped with a closed working chamber with HEPA / Carbon filtration system. The chamber does not hinder the preview of the print, its perfectly transparent walls provide excellent visibility of the printer. Working area of the device is 235 x 250 x 165 mm. Zmorph 3D printer is equipped with a camera allowing remote viewing of printouts. The device is fully compatible with the Laboratory of the Future program.
3D Zmorph Lab printer is compliant with the specification of the Laboratory of the Future program.
Zmortph Lab 3D printer, compatible with the government program Laboratories of the Future.
3D printing head equipped with a filament sensor.
Printhead and autocalibration system in Zmorph Lab
The device for moulding 3D models was equipped with a print head with a built-in felt sensor. Thanks to this solution, the printed model will not be damaged in case of lack of filament, its break or tangles on the spool. The autocalibration system makes 3D printing easier even for novice users.
Equipped with borosilicate glass
Zmorph Lab is a 3D printer made in Poland. The working table was covered with extremely flat borosilicate glass, which can heat up to 115°C. The use of this type of glass, in combination with high temperature, provides better adhesion of the first layer of the created model, with more advanced materials such as ABS, or TPE. Zmorph Lab works with almost every material available on the market.
Zmorph Lab printer equipped with borosilicate glass.
Zmorph Lab 3D Printer.
Convenient user interface and high quality electronics in Zmorph
The device is equipped with an accessible and intuitive user interface, friendly for both professionals and beginners. High quality electronics and carefully programmed stepper motor drivers are responsible for the quiet work of the printer. The use of high quality components makes the work with the device pleasant and not burdensome.
HEPA air filter and SMART extruder
3D printer is equipped with a removable carbon / HEPA filter, which absorbs harmful fumes and particles released during 3D printing. The device automatically detects the installed head. There is a sensor built into the printer head, which will inform you to replace the spool of material when it runs out.
Zmorph Lab equipped with HEPA filter and SMART extruder.
Zmorph software.
Zmorph software
The manufacturer of the printer has prepared open source software for creating gcode of the 3D file. The software contains customized advanced settings for the Zmorph Lab printer, and the friendly user interface allows for free and pleasant work. Control your designs with local settings and advanced support structures.
Kit contents
- Zmortph Lab
- Printhead - Single Extruder Toolhead 1.75
- Heated table
- WiFi 2.4 GHz network card
- HD camera
- HEPA / Carbon Filtration System
- Klipper / Octoprint software
- Filament holder
- PLA material 6 kg
- Nozzle cleaning tool
- Nozzle 0,4 mm
- PrintaStick
- Fan to cool the printout during operation
- Spacer to tear off prints
- 4 Allen keys
- Power cord
| Zmorph Lab printer specifications | |
|---|---|
| Printing technology | FDM / FFF |
| Printhead | Single Extruder Toolhead 1.75 |
| Layer height | from 0.05 mm to 0.4 mm |
| Maximum printhead temperature | 250°C |
| Workspace | 235 x 250 x 165 mm |
| Maximum table temperature | 115°C |
| Minimum path width | 0,4 mm |
| Dimensional accuracy | +/- 0.2 mm |
| Method of workspace levelling | automatic |
| Material clamping | reel holder |
| Filament diameter | 1.75 mm |
| Nozzle size | 0.4 mm |
| Supporting structures | mechanical removal printed from the same material as the model |
| Connectivity | WiFi, Flash drive (USB host) |
| Available materials | PLA, ABS, PET, PVA, HIPS, ASA, TPE, PP, PMMA, PC/ABS |
| Work monitoring | HD camera |
| Third party materials | Supported |
| Printing speed | 40 mm/sec |
| Idling speed | 120 mm/sec |
| Power supply | 100 V to 240 V AC |
| Maximum power consumption | 350 W |
| Power consumption for Single Extruder printhead | 220 W |
| Ambient temperature during operation | 15°C to 30°C |
| Storage temperature | from -10°C to 40°C |
| Type of filtration | HEPA / Carbon |
| Filtration power | 1,54 W |
| Filter dimensions | 80 x 80 x 25 mm |
| Dimensions of filtration system | 85 x 85 x 50 mm |
| Filtration control | Printhead temperature |
| Software for cutting files (slicer) | CURA |
| Supported file extensions | .3mf, .amf, .gcode.gz, .gocede, .jpg, .jpeg, .png, .bmp, .gif, .ctm, .dae, .gltf, .ply, .zae, .ufp, .x3d, .stl, .3MF, .OBJ |
| Supported operating system | Windows 8 (64-bit) or later MacOS 10.14 or later |
| Printer software | Klipper / Octoprint |
| Printer without spool holder | 520 x 500 x 450 mm |
| Printer with spool holder | 520 x 500 x 570 mm |
| Printer with HEPA filtration | 570 x 500 x 570 mm |
| Dimensions of transport packaging | 600 x 600 x 570 mm |
| Weight of set | 28.7 kg |
| Weight of printer | 14,45 kg |
| Mass of printhead | 0.7 kg |
Useful links |
