- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: NeoPixel Stick - 8 x RGBW 5050 LED strip - SK6812 - cold white - Adafruit 2869
The NeoPixel Stick is a lightstrip that has been equipped with 8 LEDs in the SK6812 chip. Each LED is individually addressed - it can light up independently of the others. Using the NeoPixel Stick you can create unusual visual designs, make your own arrangements and home lighting. Only one pin of the microcontroller is enough to operate the board. The LEDs are placed at equal distances from each other, and the placement of connectors on both sides of the module made it possible to connect successive NeoPixel Sticks in series.
NeoPixel Stick - LED strip 8 x RGBW 5050 - SK6812 - cold white - Adafruit 2869.
Equipped with two mounting holes, facilitating the implementation of various types of projects.
Technical specification of NeoPixel Stick
- Number of LEDs on the strip: 8 pieces
- LED type: RGBW 5050
- White Temperature: 6000K
- White shade: cold
- LED chip: SK6812
- LED type: individually addressed
- Two mounting holes
- Connectors on two sides for connecting the strips
- Supply voltage: 4 V to 7 V DC
- Current consumption: approx. 18 mA per LED
- Tile sizes: 10.2 x 51.1 x 3.2 mm
- Weight: 2.6 g
Pinout description
The leads of the strip have been placed on both sides of the plate to allow the user to connect up to a dozen of such plates. The pins are in the form of solder pads to which the wire should be soldered and connected to the main module - eg Arduino.
- GND - module ground
- 5VDC - supply voltage 5V
- DIN (Data IN) - digital control signal from the microcontroller
- DOUT (Data OUT) - output for connecting the next module
The NoePixel Stick leads are placed on both sides of the PCB.
