- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Description
Component set compatible with Raspberry2 B / B+ / A+ inwhich they are included:
| IPS 7" 1280x800px screen with controller + 12V/1A power supply |
|
|
Edup EP-B8531 WiFi network card for USB |
|
| HUB USB 1.1 4-ports with switch + 5V/1A power supply | |
| HDMI cable 0.5 m | |
| USB keyboard | |
| USB Optical Mouse | |
| Raspberry Pi power supply with 2 A USB port | |
| MicroUSB power cord with switch | |
| Display and keyboard case | |
| Heat sink set with self-adhesive layer - free! |
|
The set does not include:Raspberry Pi mini-computerandmemory card. These items can be purchased separately. |
LCD display
7" IPS 7" screenfor Raspberry Pi with 1280 x 800 px resolution. The driver that works with Raspberry Pi A, A+, B, B+ and 2 via HDMI is included. The IPS matrix is characterized by a bright image with high contrast and a large viewing angle.
Specification
- Diagonal of the screen: 7 "
- Controller: NT68676 (UFG)
- Matrix type: IPS
- HDMI connector (cable included)
- Power supply: 12 V DC (power supply included)
- Remote control to remotely change screen parameters
- It has function keys
- Dedicated controller attached to a handy case
- A 12 V / 1 A power supply is included
WiFi card
Edup EP-B8531 USB N standard wireless network card. Can be used as a WiFi adapter inRaspberry Piminicomputers. The recommended Raspbian operating system does not require driver installation. Network configuration is done via the graphic WiFi Config program.
Specification
- Supported standards: IEEE 802.11n, IEEE 802.11g (draft), IEEE 802.11b
- Signal frequency: 2.4 - 2.4835 GHz
- Number of channels: 13
- Transmission mode: DSSS
- Security: 64/128/125 bit WEP, WPA, TKIP, AES
- Supported operating systems: Windows XP / Vista / 7, MAC OS, Linux (including Raspbian)
USB Accessories
The included mouse and keyboard allow you to enter data and operate a mini-computer. Thanks to the 4-porthub with power supply, you only need one USB port on the mini-computer to connect all the devices included in the kit.
Specification
- USB hub
- USB interface: 1.1, compatible with 2.0
- Works at up to 1 MBps
- Number of ports: 4
- Power supply: 5 V / 1 A
- Dimensions: 83 x 23 x 20 mm
- Built-in switch
- Colour: black
- Included: power supply and USB cable
- Optical mouse
- Wired optical mouse for computers and Raspberry Pi minicomputer
- Resolution: 800 dpi
- The scanning frequency of the sensor: 300 fps
- Acceleration: 20 G
- No drivers required - Plug & Play
- It has a USB connector
- USB keyboard
- USB cable length
- It has no "right ALT" button, which makes it difficult to enter Polish characters
- Mounted in a handy case
- Dimensions: 205 x 80 mm
Power supply with micro USB cable
A power supply unit with a USB port is also included. Together with the includedmicroUSB cable, it can power Raspberry Pi. With the built-in on/off switch, you can easily turn your minicomputer off and on.
Specification
- Input voltage: 100 V to 240 V / 50-60 Hz
- Output voltage: 5 V
- Output current: up to 2 A
- Output: USB socket
- Included 1.5 m micro USB cable with switch
Display and keyboard case
The screen and keyboard are enclosed in a handy case to which the display controller is also attached. The case has a support at the back for easy positioning of the screen.
