





Quadrocopter with 6-axis gyroscopic stabilization system, which can fly both indoors and outdoors at a range of approx. 300 m. The model is controlled by 2.4 GHz camera (included) and has a built-in HD camera with gimbal. The set includes 2 batteries, which together allow for about 20 minutes of flight and a suitcase.
Attention! The sale of the product has been completed. Check other devices in this category. |
Feature | Description |
---|---|
Size | 65 x 65 x 17 cm |
Reach | 300 metres |
Stabilization | 6 axes |
Flight time | 2 x 10 minutes |
Charging time | 2 x 120 minutes |
Control |
2,4 GHz - radio apparatus included |
Material | plastic |
Camera | Embedded HD camera |
Memory card | 4 GB card included |
Quadrocopter with a 6-axis gyroscopic stabilization system, which can fly both indoors and outdoors at a range of up to 300 m. The model is controlled by 2.4 GHz apparatus. Built-in camera enables recording in HD resolution. It also has image stabilization. The mounted bracket (gimbal) allows to control the position of the camera, as well as to install another model, e.g. GoPro. The recorded shots are saved on the supplied microSD memory card.
The construction made of high quality materials makes the drone resistant to falls.
In order to start the flight it is necessary to insert4 x AA fingers into the transmitter(not included in the set). The quadrocopter's 7.4V Li-pol battery is sufficient for 10 minutes of continuous flight (one additional package included). The included charger allows you to fully charge the battery within 2 hours.
Drone - Range | 300 m |
Drone - Camera | yes |
Drone - Flight time | 10 min |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
Customers who bought this product also bought:
Set of CF THT 1/4W resistors described - 1000pcs.
A set of 20 values of through hole resistors 0,25 W with tolerance of 5 %, 50 pieces of each. The elements are signed which facilitates finding the desired value.Raspberry Zero V1.3 mini Camera - Waveshare 12039
Module with the camera, compatible with Raspberry Pi Zero v1.3. The device has a matrix CCD 1/4" with the resolution of 5 Mpx, supports mode HD 1080px.Connecting cables male-to-male 20cm - 40pcs
Set includes 40 PCs of multi-colored hook-up wires with a length of 20 cm ended, on both sides, with the male connector.Tools set for soldering + soldering iron
A kit for soldering basic components with additional tools.Products from the same category
DC Motor - Tamiya 980112M Mabuchi FA-130
Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.LED strip power switch - button
The switch is designed for switching on and off and dimming the lighting of LED strips and LED tapes.Wide angle M12 lens 2,8mm with adapter for Raspberry Pi camera - ArduCam LN032
Wide angle M12 lens with CS Mount adapter, making it compatible with Raspberry Pi HQ camera. The angle of view is 130° , and its focal length is 2.8 mm.Universal multimeter UNI-T UT50A
Multimeter can measure voltage DC and AC up to 1 kV, flow, AC and DC current to 20 amp, resistance and capacitance. Th device has auto-backlight, saves recording of the...Liquid flow sensor transparent YF-S201C 30l / min - 1/2
Sensor of liquid flow operating in the range from 1 to 30 liters per minute. Is supplied with the voltage from 5 V to 24 V, the output signal is a frequency proportional to the...LED 3mm holder Kradex - short - 5 pieces
LED holder 3 mm, made of plastic. The subject of sale is the holder, LEDs can be purchased separately. Price for 5 pieces.Touch LED strip power switch - behind the mirror glass
The device is intended for touch on and off and adjusting the brightness of LED strips and LED tapes. The module is mounted behind the mirror glass.Lens LS-1820 M12 mount - for ArduCam cameras
The lens LS-1820 M12x0.5 is with the following parameters: the focal length is 1.8 mm, the angle is 150 °, the aperture of 2.4, the format of 1/4". It is connected to cameras...Marbotic Smart Numbers - educational game with wooden letters for tablet
Educational game for the youngest children from the age of 3 , where they can learn the numbers, learn to count up to 10 and up to 100, as well as add and subtract. They will...Antibacterial liquid surface cleaner Virseptol 250 ml - bottle with an atomizer
Virseptol liquid of 250 ml capacity, bactericidal and virucidal. It is available in a plastic bottle with an atomizer. It is designed for disinfecting washable surfaces with...Linear Actuator for Dobot Mooz 3D Printer
Linear actuator used in the 3D Dobot Mooz printer. The actuator housing is made of aluminium. Its movement range is about 135 mm, while its dimensions are 285 x 56.8 x 53 mm...