- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
The photoelectric sensor detects objects using the method of reflections from the reflector, with the function of MSR. The detection range is from 0.1 m to 4 m. It has two modes of operation: Light-ON and Dark-ON. It is powered with the voltage from 12 V to 24 V, it has the NPN output. The sensor has a tightness class of IP67 and a high resistance to electromagnetic interference.
Connection
The sensor has three wires with the removed insulation for the connection. The device works on the basis of a relay, after detection of the element, it switches to a low status. Connecting the signal to the power source may cause pernament damage to the sensor.
| Cable | Description |
|---|---|
| Brown | Supply voltage. |
| Blue | Ground. |
| Black | Signal. |
Specification
- Supply voltage: 12 to 24V
- Load: max 100 mA
- Insulation resistance: 20 MΩ min. at 500 VDC
- Type: photoelectric
- Detection range: from 0.1 m up to 4 m
- Output: NPN
- Light source: IR LED of 860 nm
- Operation mode: Dark-ON, Light-ON
- Ambient lighting:
-
- lamp: max 3000 lux
- solar light: 10000 lux max
- Tightness class: IP67
- Response time: up to 1 MS
- Operating temperature: -25°C to 55°C
- Cable length: 2 m
- Case: PBT
- Intensive screening
- Dimensions: 10.8 x 20 x 31 mm
- Weight: 0.07 g
Kit contents
- Photoelectric sensor
- Reflector for photoelectric sensors
