- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Touchscreen LCD TFTdisplay with a diagonal of2.4"and a resolution of240 x 320 px. It works with a voltage of 3.3 V and communicates using theSPIbus. In addition, on the board there is a microSD slot formemory cards. The device uses the SPI bus outputs (CS, D/C, SCK, SDi, RESET).
|
Attention! The system operates with a voltage of 3.3 V. In order to connect it to Arduino a voltage converteror a resistive divider is required. |
Inputs
The system has output in goldpin raster 2.54 mm standard with soldered pins.
| Pin | Description |
|---|---|
| TOUCH | Line connecting the touch |
| SDO | SPI bus data line. |
| LED | Backlight 3.3 V. |
| CCS | Line clock of the SPI bus. |
| SDI | Data line of the SPI bus. |
| D/C |
Display instruction register selection (low state) or data register (high). |
| RESET |
Reset is activated by low state. |
| CS |
Chip selected activated by low state. |
| GND | Ground. |
| VCC |
Power 3.3 V. |
Specification
- Screen size: 2.4"
- Resolution: 240 x 320 px
- Working voltage: 3.3 V
- microSD card slot
Useful links |
