- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: Zortrax M300 Dual
Zortrax3D printer, designed to print elements with dimensions of 265 x 265 x 300mm. Zortrax M300 Dualhas been enclosed in a sealed working chamber. It has a color LCD touch screen. The printer is equipped with a WiFi module, USB andEthernetportsandhas built-insensors that enable continuous control of printing. It is designed for both private and professional use. Placed in the M300 Dual Extruder with a double hotend and two separate heads allows you to create models with a variety of geometries difficult to obtain on printers working with only one material. It alternates between model material and water soluble material.
Blackout response system
Protects the printer from power failure. Thanks to the built-in capacitors, the printer is able to operate until the time necessary to automatically save the print progress. In the event of a power failure, the device will issue a message whether to continue printing or start again.
Material sensors
They allow the detection of all kinds of errors such as: lack of material, incorrect placement of the filament, cloggingof the head or pause during operation. They also reduce possible losses of material. The device is equipped with a camera to control the entire printing process at all times.
Print at will!
The M300 Dual supports a variety of work platforms and has the ability to use different filaments, regardless of which manufacturer you choose. You will have the ability to configure the ideal filament type to match the type of printed item. You will be able to print any difficult component, because the M300 Dual works on two pillars, one modelling and one supporting pillar (ultimately water soluble) and there is a possibility of single or double extrusion.
Main features of the Zortrax M300 Dual
- LPD Plus technology
- Large working area 265 x 265 x 300 mm
- Wi-Fi, USB and Ethernet connectivity
- Power control system
- Automatic working platform calibration
- Compatibility with different work platforms
- Single and double extrusion mode
- External materials handled
3D printer operation Zotrax M300 Dual
Work with the printer starts with preparing a model in any CAD program with the possibility of saving the file to the following formats: .stl,.obj, .3mf or .dxf.Then, after starting theZ - SUITEprogram and restoring the file, it should be saved to the .zcodex format(a model divided into individual layers, which the printer will read as a scheme of horizontal and vertical movements of the extruder and platform). Here you will also select the type of material from which the model is to be made. The next step will be to turn on the printing device and load the appropriate materials selected in Z - SUITE. While working with the printer it is possible to stop, interrupt, start the process at any time. The printer can also be operated using the touch screen located at the front.
HEPA Cover accessories
Zortrax HEPA Coveris designed forZortrax M200andM200 Plus3Dprinters. It is a device that filters 3D printouts, improves their quality and filters out up to 99% of particles released during 3D printing. It also reduces the distortion of print elements by keeping a constant temperature in the chamber. It eliminates unpleasant smells.
Zortrax HEPA Cover has dimensions of 426 x 357 x 230 mm, has an electric fan with adjustable speed, which ensures optimal working conditions and prevents overheating or excessive cooling.
3D printer specification Zortrax M300 Dual & HEPA Cover
Technical Specification | |
---|---|
Power supply voltage: |
110 V / 5.9 A @ 50 / 60 Hz 240 V / 2.5 A @ 50 / 60 Hz |
Maximum power: | 400 W |
Printing technology: | LPD Plus (layered molten material application technology) |
Work area: | 265 x 265 x 300 mm |
The form of the material: | Reel |
Diameter of material: |
1.75 mm |
Nozzle diameter: |
0.4 mm |
Communications: | USB / Ethernet / WiFi |
Extruder: | Printing from model and support material, equipped with material clogging sensor |
The cooling system: | Two extruder fans and a radial fan per printout |
The head: | Double, v3 version |
Material sensor: | 2 x Mechanical |
The platform: |
Perforated, heated |
Supporting structures: |
Mechanically removed - printed from the model material / Water soluble - printed from the support material |
Materials dedicated to single extrusion |
Z-NYLON, Z-ULTRAT, Z-PETG, Z-GLASS, Z-PLA |
Dedicated materials for double extrusion |
Z-PETG, Z-PLA, Z-ULTRAT PLUS, Z-SUPPORT PREMIUM |
External materials: |
Supported |
Platform levelling: |
Automatic point height measurement |
Display: |
Touch screen IPS 4" 800 x 480 px |
Layer resolution: |
from 100 to 300 microns (for 0.4 mm nozzle) |
Minimum wall thickness: | 400 microns (for 0.4 mm nozzle) |
Maximum platform temperature: | 105 °C |
Maximum printing temperature (extruder): | 310 °C |
Working platform: | Heated |
Processor: | Quad-Core |
The operating system: | Android |
Room temperature for the device in operation: | from 20°C to 30°C |
Storage temperature: | from 0°C to 35°C |
Software package: | Z-SUITE |
Input file types supported: | .stl / .obj / .dxf / .3mf |
Operating systems supported: | Mac OS X / Windows 7 and newer versions |
Supported file format | .zcodex |
The weight of the device: | 41 kg |
Technical Specification HEPA Cover | |
Destined for: |
Zortrax M300/ Zortrax M300 Plus / Zortrax M300 Dual |
Filters available |
|
Mains voltage | 100 V to 240 V AC, 0.7 A 50/60 Hz |
Power supply |
12 VDC, 0,5 A (min) |
Average energy consumption | 6 W |
Dimensions | 545 x 483 x 280 mm |
Net weight | 2,55 kg |
*Dimensions of an assembled, ready-to-use device.
Contents of Zortrax M300 Dual & HEPA Cover
- Printer
- Side panels
- Z-SUITE
- Starter Kit
- 2 spools of material (Z-PETG, Z-SUPPORT Premium)
- 1 x perforated plate
- 1 x glass plate
- 2 x spool holders
- Support pillar module
- HEPA Cover
- Filter module (adjustable speed electric fan, HEPA filter, carbon filter)
- Power supply
- Front door
- Operating instructions
Useful links |