- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: Khadas Captain - MXM3 cap for Khadas Edge
Khadas Captain forEdgeseries mini-computers equipped withMXM3 314-pinconnector. The module expands the minicomputer's capabilities with an M.2 disk slot, gesture detection, touchscreen and camera slots, and two function buttons for games.
Contents of the Khadas Captain.Main features of the Captain cover plate
- PCI-E slot for M.2 drives: 4-line PCI-E slot for NVMe M.2 drives.
- Gesture detection: APDS-9960 sensor for human-machine interaction.
- Display connector: eDP and TP ports are used to connect the touch screen.
- Buttons: two function buttons (left, right) for games.
- Power supply: the overlay can be powered from a minicomputer or vice versa.
Khadas Edge docking
The Captain cap is equipped with the MXM3 314-pin connector, to which the Khadas Edge minicomputer is docked. After placing the module in the slot, the software will automatically detect the board.
Docked Khadas Edge minicomputer in Captain extension.
The screen connected to the Captain extension.
Screen connector
Khadas Captain is equipped with eDP and TP connectors, which allow to connecta dedicated5" 1080p 1080pscreenwith 5x touch. By adding a screen you can create a small, mobile game console.
Gesture sensor
The overlay has a built-in APDS-9960 sensor. It allows to detect light intensity, RGB colours, distance and gestures.
The APDS-9960 sensor in Khadas Captain.
Emergency power supply and SSD in Khadas Captain.
M.2 drive slot and battery connector
On the back of the module there is a PCI-E slot for connecting NVMe M.2 SSDs, which can be used for example to create a small home server. Additionally, there has been installed connector forLi-Pol battery, which can be used as backup power supply.
Khadas Captain specification
| Parameter | Description |
|---|---|
| Camera | Interface: 4-line MIPI-CSI Two 12 MPx cameras supported Connector: 30-pin 0.5 mm FPC |
| Display | 4-line MIPI-DSI 4-line eDP 1.3 to 10.8 Gb/s |
| Touch panel | 10-pin 0.5 mm FPC |
| Slot M.2 | 4-line connector PCI-E 2.1 Drives supported: SSD M.2 2280 NVMe |
| LAN | 10 / 100 / 1000 Mb/s Supports WOL |
| SD cards | Up to 256 GB |
| Sensor | APDS-9960 Detection: distance, brightness, RGB colour, gestures |
| Tracking of movements | ICM-2062 6-axis: 3-axis gyroscope and 3-axis accelerometer |
| Audio | Audio codec: Realtek ALC5651 3.5 mm jack Microphone sensitivity: -42 dB Speaker: via FPC |
| DC Jack | Power supply voltage: 12 V Diameter: 5.5 / 2.1 mm |
| Battery | 2-cell Li-Pol IC: CW2015 Connector: 7-pin, raster 1.25 mm |
| RTC connector | Raster 0.8 mm |
| Buttons | 8x (programmable game pads) 2x (left and function) 2x (reset, U-Boot/Func) |
| WiFi antenna | 2x chip antenna Model: Pulse W3006 from 2.4 GHz to 2.5 GHz / from 5.15 GHz to 5.85 GHz dualband |
| Buzzer | SPL: >75 dB (distance 10 m) Response time:< 40 ms Oscillating frequency: 4000 Hz |
| IR Receiver | 2 channels |
| LED | 1x red LED, programmable |
| USIC | through a 1.25 mm connector |
| 40-pin connector, 2.54 mm raster | USB, I2C, SPI, I2S, SPDIF, ADC, GPIO STM85 |
| Mounting holes | M3 x 4 |
| Compatibility | Khadas Edge |
| Dimensions | 116 x 82 x 13.5 mm |
| Mass | 52 g |
