- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: SNMP Agent AGEDI-B in a DIN housing
Product designed tomonitor indications from other devices, using MODBUS RTU. AGEDI-B enables cyclic temperature reading from two sensorsfrom DS1920 family, connected to 1-Wire interface. The device has eight I/0 ports, which allow for remote reading and changing their status. The product in a housing adapted for mounting ona DIN rail.
SNMP Agent AGEDI-B in a DINrail mounted housing.
The SMP agent can track up to fourdevices simultaneously, each of which cangenerate up to 120 parameters. AGEDI-B analyzes indications obtained from external devices and sends to them NMS notifications for defined conditions.
Supported functions
- Web server designed for remote configuration, status preview and device reset
- SNMP server for reading operating conditions of monitored devices. This function is complemented by the ability to send notifications to indicated IP addresses from the NMS Traps list. There is a possibility to limit the access to readings through the list of NMS addresses
- DHCP client
- Support of the NBNS protocol
- Mechanism of locating devices in the network with dynamic network settings assignment
- TFTP server for remote software reloading
- ACL access control list to the web server
SNMP agent specification AGEDI-B
- Supply voltage: 7 V to 26 V
- Industrial module type:EthernetGateway, Modbus Gateway, Converter, Serial Port Server
- Port type I/0: 1xEthernet RJ45, 1x RS232, 1x RS485
- Number of inputs / outputs: 8 / 8
- 10Mbit/s Ethernet interface
- RS-232 serial interface configurable to 230400 bps
- RS-485 serial interface configurable to 230400 bps
- RS-485 serial interface configurable to 230400 bps
- Operating temperature: 0°Cto 55°C
- Dimensions: 105 x 86 x 58.5 mm
Useful links |
