- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Filament Devil Design PMMA 1.75 mm 1 kg - Ruby Red Transparent
The PMMA filamentinRuby Red Transparent colour is a fibre-based plastic, commonly known as "plexiglas". It perfectly replaces glass and transmits UV rays.PMMAis a material with reduced elasticity and has lower shrinkage than ABS. Filament on a spool has a diameter of 1.75 mm, is vacuum packed together with a moisture absorber. The product weight is1 kg.
Filament Devil Design PMMA 1.75 mm 1 kg - Ruby Red Transparent.
In our offer of filaments you will also find other materials and colors.
PROPERTIES OF THE PMMA FILE
- The material is UV-resistant
- Weather-resistant
- Scratch-resistant and hard plastic
- It has less material shrinkage than ABS
- Printing requires a heated table
Suggested print parameters for filament
| Head temperature | From 225°C to 245°C |
| Table temperature | From 80°C to 90°C |
| Cooling the printout | Optional |
|
Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Specification of the Devil Design filament
| Parameter | Scope |
|---|---|
| Diameter | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,05 mm |
| Roughness of the philanthropy | +/- 0,02 mm |
| Material surface | High gloss |
| Material contraction | Average |
| Spool - material | Transparent polycarbonate |
| Weight of empty spool | ~250 g |
| Reel diameter | 200 mm |
| Reel width | ~70 mm |
| Mounting hole diameter | 52 mm |
| Package | Printed carton |
| Packaging dimensions | 205 x 205 x 80 mm |
| Vacuum packing | Yes |
| Moisture absorber | Yes |
| Product weight | 1.0 kg net |
