- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: Devil Design PLA Matt 1,75 mm 1 kg - Red
Redfilamentwith a diameter of1,75 mm. PLA Matt material produced by Devil Design is biodegradable, made from renewable natural resources. The material is characterized by low shrinkage and matt surface. The product has been vacuum packed with a moisture absorber to protect it during transport. Spool opening diameter is52 mm.PLAMattFilmscan be used with any printer that does not have built-in protection against material produced by an external company. The net weight of the product is1 kg. It is recommended to use a sponge to clean the filament.
In our offer of filaments you will also find other materials and colors.
Filament Devil Design PLA Matt 1,75 mm 1 kg - Red.
Properties PLA Matt
- Made of biodegradable materials
- Matt surface of the material makes the layers less visible
- Increased adhesion between layers and between the working platform of the equipment and the manufactured elements
- Low shrinkage after cooling
- High rigidity of printed parts
Suggested parameters of printing with the use of felt
| Head temperature | From 190°C to 210°C |
| Table temperature | From 50°C to 60°C |
| Print cooling | Recommended |
|
Due to differences in printer design, the above data should be treated as a guideline, and the appropriate values should be determined experimentally. |
Wide selection of colours and materials.Wide range of colours and materials
In our offer you will find more types offeltfrom the producerDevil Design. They come in a wide range of colours and materials. Our assortment consists of carefully selected felts for various applications - be sure to check out our other offers! All materials are available from us at favourable prices.
Technical specifications and physical properties of PLA Matt
| Parameter | Range |
|---|---|
| Filament diameter | 1,75 mm |
| Dimensional tolerance of the filament | +/- 0.05 mm |
| Material surface | Matt |
| Material shrinkage | Low |
| Colour | Red |
| Retraction | +/- 5 mm |
| Nozzle diameter | ≥ 0,2 mm |
| Spool material | PLA |
| Spool diameter | 200 mm |
| Spool width | 70 mm |
| Mounting hole diameter | 52 mm |
| Vacuum packing | Yes |
| Moisture absorber | Yes |
| Net product weight | 1,0 kg |
