



Cable USB (type A) - microUSB (B type) used to connect computer with devices equipped with a microUSB-B. Cable enables the connection of both plugs, in "normal" way and in "upside down" way. Length: 1 meter.
Attention! The product has been discontinued. Check others products in category. |
Cable USB (type A) - microUSB (B type) used to connect computer with devices equipped with a microUSB-B. Due to the special mechanism, the cable enables the connection of both plugs, in "normal" way and in "upside down" way. Length: 1 meter.
Cable - type | 2.0 USB 2.0 A - microUSB B |
Cable - Standard | m-m |
Cable length | 1.0 m |
Lead | 4 |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
Customers who bought this product also bought:
Wolfson Cirrus Logic Audio Card - sound card for Raspberry Pi 3/2/B+
The Wolfson Cirrus sound card gives Raspberry Pi users in 3B, 2B and B+ versions the flexibility of sound functions. It enables simultaneous recording of audio and video, as...Power supply T5875DV for Raspberry Pi 3B+/3B/2B/Zero - microUSB 5,1V / 2,5A - original white
Original power supply for minicomputer Raspberry Pi with a microUSB tip. Cooperates with models 3B+, 3B+ 2B, 1B+, 1B, 1A and Zero and Zero W. Maximum efficiency current is 2.5 A.DC Motor 37Dx70L with 50:1 Gear 12V 200RPM + encoder CPR 64
High power motor with 50:1 gearbox, 200 rpm, torque 12 kg*cm (1.19 Nm). The device has a quadrature encoder with a resolution of 64 pulses per revolution (after translating...Arduino Due ARM Cortex - module A000062
The popular run set based on the Atmel AT91SAM3X8E. Thanks to the Arduino Due, the user can create layouts using a system with a 32-bit core ARM Cortex, based on libraries for...SparkFun Razor IMU - 3-axis accelerometer, UART gyroscope and magnetometer
The sensor is a combination of ITG-3200 3-axis digital gyroscope, ADXL345 accelerometer and HMC5883L compass. Data is processed by microcontroller with uploaded Arduino...Redox Beta - Li-Po / Li-Fe / Li-Ion / Ni-CD / Ni-MH charger with balancer
Package loader/unloader: LiPo, LiFe, LiIon, NiCDi NiMH with built-in Redox Beta cell balance.Power supply Redox 12V/5A - DC plug 5,5/2,5mm
Pulse power supply Redox. Supply voltage: 100 V - 240 V AC / 50 Hz - 60 Hz. Output voltage: 12 V DC. Output current: 5 A.Redox Li-Pol battery pack 3300mAh 30C 3S 11.1V
Redox lithium-polymer battery. Discharge current: continuous 30 C (99 A), weight 251 g, dimensions 138 x 43 x 19 mm .L298N - two-channel motor controller - 12V/2A
Module with dual-channel driver for DC motors L298. It is supplied with the voltage up to 12 V. Maximum current per channel is 2 A. The system has embedded voltage regulator 5...Pololu S8V3A - step-up/step-down converter adjustable 2-12V 0,3A
Step-up/step-down converter with adjustable output voltage from 2 V - 12 V. Maximum current 300 mA. Power supply 1.5 V - 16 V.Products from the same category
DC Motor - Tamiya 980112M Mabuchi FA-130
Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.Micro-Match connector for 10-pin tape
Micro-Match connector on 10-vein tape with a pitch of 1.27 mm.Pololu LPY550AL 2-axis XZ gyroscope
A sensor for measuring angular speed in two axes: XZ. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...3-axis magnetometer, digital MAG3110
3-axis magnetometer in a small case DFN. Measuring range: ±1000 uT. Sensitivity at 0.1 uT. The communication interface is I2C bus.HiTechnic color sensor - for Lego Mindstorms EV3 and NXT
The sensor together with the sensor and the intensity is vision Lego NXT robot. The sensor is able to distinguish between all colors including the colors of the blocks.Servomechanism - Lego Mindstorms NXT
The servo can serve as the actuator of the robot. The device allows precise movement accurate to 1 degree.USB Bluetooth adapter - Lego Mindstorms NXT
Adapter USB-Bluetooth allows the wireless exchange of data between computers, PC or Mac and the NXT device.Receiver module GPS-FGPMMOPA6H GPS
Receiver module based on MT3339 chip in the surface soldered case - SMD. It has a built-in antenna and the possibility to connect the external version.