- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Radio frequency meter works as a vector network analyzer one one port and a scalar analyzer on both ports. It has the ability to measure the spectrum of a field intensity and a signal generator. Operates in the frequency range from 150 kHz to 3 GHz.
Basic functions
- Measurement bandwidth (the measurement of filters, amplifiers, and directional antennas)
- Measurement of falling waves S21
- Measurement of VSWR (S11)
- The measurement of the reflected wave
- Adjustment of network impedance
- Measurement of the quality of the antenna power system
- DFT (S11): measuring cable damage
- Analysis of the spectrum (SPEC)
- Measurement of electromagnetic field intensity (FILED)
- Measuring sources of radio signals
- Viewing the frequency spectrum and field strength
- Control of emissions of radio stations and radio source
- RF source
- AF SOURCE
Specification
- Frequency range
- Measurement of transmission: from 150 kHz to 3 GHz
- Measurement of the reflected wave from 250 kHz to 3 GHz
- Output signal level:
- +3 dBm or 2 MW (for 1 MHz to 2 GHz)
- 0 dBm (2 GHz to 3 GHz)
- With an external damper with variable attenuation from 0 dB to 30 dB
- Sensitivity
- From 300 kHz to 1 GHz: better than -107 dBm or 1 µV
- From 1 GHz to 2.2 GHz, better than -87 dBm or 10 µV
- Maximum (damaging) signal level for all ports: DC 15 V, +20 dBm
- Measuring ranges S21
- From 1 MHz to 500 MHz: 100 dB
- From 500 MHz to 3 GHz: 70 dB
- Resolution:
- Frequency: 1 Hz
- Level: 0.01 dB
- Phase: 0.01 s.
- The accuracy of signal level: (25 °C, battery voltage >7,5 V)
- +/-1.5 dB (S11, spectrum and field)
- +/- 0.3 to 0.5 dB (S21, attenuation)
- Absolute orientation (typical better than 90 %)
- From 3 MHz to 15 MHz and 2 GHz to 3 GHz: 18 dB
- From 15 MHz to 2 GHz, 20 dB
- The relative orientation (in the calibration SALT and orientation of the calibration device is better than 48 dB)
- From 3 MHz to 2.5 GHz: 45 dB
- From 1 MHz to 3 MHz and 2.5 GHz to 3 GHz: 25 dB
- From 300 kHz to 1 MHz: 20 dB
- The accuracy of a phase:
- From 3 MHz to 1 GHz: 2 stages
- From 1 GHz to 2.5 GHz and 1 MHz to 3 MHz: 5 degrees
- From 2.5 GHz to 3 GHz 300 kHz to 1 MHz: 8 degree
- The direction of the diameter of the jumper:
- From 3 MHz to 15 MHz, and 1.5 GHz to 3 GHz: 18 dB
- From 15 MHz to 1.5 GHz, 30 dB
- Frequency stability: +/- 1 ppm/year at 25 °C
- Voltage
- External power supply: 11.5 V to 32 V
- Batteries: 7.2 V to 8.4 V
- Battery work time
- Facilities and field: 7 hrs
- S21, S11, attenuation: 5 h
- STOP mode, brightness 10 %: 20 hours
- Operating temperature: -30 °C to 60 °C
- Dimensions: 200 x 114 x 46 mm
- Weight: 2 kg with batteries
The set includes
- Analyzer KC901S
- Charger
- 4 18650 battery: 3.7 V / 3400 mAh
- Memory card microSD 8GB
- Calibration set
- Closed
- Open
- 50 Ohm
- Carrying strap
- Reduction NM/UC1-F
- Reduction NM/BNC-F
- Aluminum chest
- Manual in Polish language
- 12-month warranty
The kit also includes a convenient chest.
