• EOL

3D printer - Creality Ender-6

Index: CRL-18684 EAN: 6971636408963
3D printer by Creality. The device has a cubic design with dimensions of 495 x 495 x 650. The metal frame is encased in transparent plastic, so the printer has a closed working chamber. Ender-6 has a motherboard with silent TMC2208 stepper motor drivers. During operation, the device generates a sound not exceeding 50 dB. The dimensions of the printer's work area are: 250 x 250 x 400 mm. The set consists of partially assembled elements so the assembly takes several minutes.
3D printer - Creality Ender-6
€622.90
€506.42 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Creality

Attention!

The product has been discontinued. Check other products in category.

Product description: 3D Printer - Creality Ender-6

3DPrinter by Creality. The device has a cubic design with dimensions of 495 x 495 x 650. The metal frame is encased in transparent plastic, so the printer has aclosed working chamber. Ender-6 has a motherboard with silent TMC2208 stepper motor drivers. During operation, the device generates a sound not exceeding 50 dB. The dimensions of theprinter's work area are: 250 x 250 x 400 mm. The kit consists of partially assembled elements, so the assembly takes several minutes.


Presentation of Creality Ender-6 model.

Zaawansowana konstrukcja pozwala uzyskać jeszcze lepsze efekty drukowania.

Advanced design for better print results.

Improved design for better print results

The printer's cubicdesign provides increased stability during operation. This improves print precision, resulting in final models that are accurate to0.1mm. The print engine has been designed to operate at increased speeds of up to 150 mm/sec.

Large working area and carborundum glass overlay

The printer has a working area of250 x 250 x 400 mm. This is large enough for both amateur projects and semi-professional applications. The printer uses a heating table with a surface ofcarborundum glass. This solution ensuresbetter heat conductionand thus faster heating and better print adhesion. In addition, the first print layer is almost perfectly smooth.

Duże pole robocze i powierzchnia hotbed ze szkła karborundowe

Large workspace and hotbed surface made of carborundum glass.

Nowoczesna płyta główna z cichymi sterownikami silnika
Modern motherboard with silent motor drivers.

Redesigned motherboard with TMC2208 drivers

Motherboard is equipped with TMC2208motor driversfor efficient and silent operation. The noise generated during printingdoes not exceed 50 dB. This significantly increases comfort of work. The printer even during long and complicated printouts does not distract the user.

Filament sensor and automatic print resumption

Ender-6 is equipped with a filamentsensor, which in the case of sudden termination of feeding thematerial toprint, or interruption of its continuity, immediately stops the work without damaging the printout. The operation of the device is resumed after the loading of a new filament. Ender-6 also has a function to resume printingafter a power failure, which provides additional protection for user's work.

Funkcje zapewniające ochronę wydruków 3D

Features to ensure the protection of 3D prints.

Dodatkowe funkcjonalności ułatwiające pracę

Additionalfeatures to make your work easier.

Features to help you create 3D prints

The Ender-6 is equipped with a4.3'' HD touchscreen. The modernized menu is clear and intuitive in use, offering easy access to the most important settings. The printer haslarge adjustment knobs, which greatly facilitate the leveling of the heating table. All cables in the device are well protected. Their arrangement during installation does not cause any problems.

Easy to install

The Ender-6 is delivered as aself-assembly kit. It consists of pre-assembled components, so it does not take long to assemble. The individual assembly steps are uncomplicated and should not cause problems even for less experienced users.

Avideo showing the various stepsof printer assembly.

Creality Ender-6 3D Printer Specifications

Technical specifications
Printing method: FDM
Supply voltage: 115 V to 230 V (AC - mains)
Power: 360 W
Printing speed: 60 mm/s recommended
Nozzle diameter: standard: 0.4 mm
Supported Filament: PLA, TPU, Wood, Carbon Fiber,
Filament diameter: 1.75 mm
Print resolution: 0.1 mm
Print thickness: 0.1 mm to 0.4 mm
Display: 4.3'' touchscreen
Supported operating systems: Mac OS, Linux, Windows 7/8/10
Operating mode: SD card
File Format: .stl, .3mf, .amf, .obj, .gcode
Software: Cura, Repetier Host, Simplity 3D
Print size: 250 x 250 x 400 mm
Nozzle temperature: 260°C
Table temperature: 100°C
Dimensions of printer: 495 x 495 x 650 mm
Weight: 27 kg

3D - print surface 250x250x400mm
3D - type of printout FFF/FDM
3D - accuracy of printing 0.1 mm
3D - hotend amount 1
3D - printing speed 30 mm/s do 60 mm/s
3D - printing thickness 0.1 - 0.4 mm
3D - nozzle temp 260 °C
3D - table temp. 100 °C
Package width 54 cm
Package height 40 cm
Package depth 62 cm
Package weight 26 kg

Konrad

01/10/22

Question: Does the printer have an auto-leveling table?
Answer: This model of 3D printer does not have a table auto-leveling function.

Product reviews

3D printer - Creality Ender-6

5/5

Average grade

5

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: