- Reduced price
Product description: A set of accessories for the Flashforge Adventurer 4 3D printer - nozzles and an overlay for the work table
The kit includes original accessories dedicated to the Flashforge Adventurer 4 printer. There are two additional nozzles : 0.6 mm / 265 ° C and 0.3 mm / 240 ° C. The package also includes a heating table cover on which 3D models are formed.
Our store also offers the Flashforge Adventurer 4 3D printer.
Flashforge Adventurer 4 3D printer accessory kit .
The set includes, among others two types of modular nozzles .
Additional nozzles
The kit includes two additional modular nozzles with different hole diameters and maximum operating temperatures:
- 0.6 mm / 265 ° C nozzle - has a hole with a diameter of 0.6 mm and is designed to work with a maximum operating temperature of 265 ° C
- Nozzle 0.3 mm / 240 ° C - equipped with a hole with a diameter of 0.3 mm, the maximum working temperature is 240 ° C
Replacing the nozzle on the Adventurer 4
Replacing the original modular nozzles used in the Flashforge Adventurer 4 is very simple. To do this, unload the filament and turn off the printer. Then press the two lock buttons at the front of the head at the same time, then gently pull the nozzle out and put the new one in the same place, making sure that it is properly seated.
The manufacturer recommends calibrating the newly installed components each time after replacing both the nozzle and the entire head. To do this, go to the "Maintain" section in the printer menu, then "Change Extruder" and enter the temperature value written on the sticker attached to the product. In the next step, select the nozzle type with the appropriate diameter and working temperature in the picture menu.
How to replace the nozzle on Flashforge Adventurer 4 ?
Items included in the accessory kit .
Work table overlay for Flashforge Adventurer 4 3D printer
Hotbed overlay for Flashforge Adventurer 4 3D printer. The product is a sheet of flexible metal with an additional rough coating on which 3D prints are formed. On the sides and front there are handles for easy installation on the heating table. The overlay ensures good adhesion of the first layer of filament and easy tearing off the finished models.
Kit contents
- Nozzle 0.6 mm / 265 ° C - 1 pc.
- Nozzle 0.3 mm / 240 ° C - 1 pc.
- Overlay for the working table - 1 pc.
