- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Home sensor of measuring the earthquakes in the form of the shield for the Raspberry Pi. It has 3 accelerometers and the so-called geophone. It works with a sampling rate of 100 samples per second. It can detect local motions (up to 10 km) and regional (up to 400 km). The device works in the internet cloud joining a global network of sensors.
Device specification
Key features
- 3 modules of accelerometer
- Geophone to detect weak motions
- Magnitudo motion detection of 2 to 80 km
- Magnitudo motion detection of 4 to 400 km
- A processor operating at a speed of 100 p/s
- The possibility of early warning thanks to the support of 4 packages per second
- The possibility to work in the cloud and to warn about the earthquake
A special application on the smartphone
The manufacturer provides an app inGoogle Play, giving access to the local sensor network via notifications about the upcoming earthquakes with details such as magnitude, area, depth, time, etc.
|
Kit tested by the manufacturer and ready to use right out of the box. It has all the necessary elements, including Raspberry pi 3. |
How it works
Raspberry Shake 4D is directly connected to the GPIO pins of the Raspberry Pi. Using a very sensitive sensor, geophone and accelerometers, it is capable of detecting any motion of the earth. The connection of the three motion sensors of 2G MEMs (similar to those in smartphones) that allows to check the movements in all 3 directions (North - South, East - West, top - bottom).
$ sensors transmit actual seismic data at the rate of 4 packages per second that are received through the software on the Raspberry Pi. Then, the data is transmitted online to the Raspberry Shake Community that collects the data and warns about the danger
Specification
- Raspberry Shake 4D: version V5
- Degree of protection: IP10
- Dimensions: 100 x 120 x 50 mm
Included in the set
- Raspberry Shake 4D
- Sensor of vertical and horizontal movements of the Earth - geophone, 4,5 Hz
- Raspberry Pi 3
- Case
- MicroSD card of 8 GB with the installed system
- Ethernet Cable
- Power Adapter 5 V / 2.5 A
Useful links |
