- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description:Lotus V1.1 - compatible with Arduino - Seeedstudio 102010168
Seeeduino Lotus module is based on popular ATmega328P microcontroller and has CH340 converter. Pinout is compatible with Arduino Uno. Lotus has 14 digital inputs/outputs, 6 PWM channels, 6 analog inputs and popular communication interfaces. The module is equipped with 6 Grove connectors. It operates with voltage of 5 V. It communicates through a microUSB connector.
Seeedstudio Lotus - compatible with Arduino.
|
The manufacturer provides a detailed user guide. |
Main features of Seeeduino Lotus
- ATMega328 microcontroller with Arduino Uno bootloader at 16 MHz.
- 12 connectors to connect sensors from Grove series.
- Operates on 5 V.
- Connectors layout compatible with Arduino Uno.
- Compatible with Mac OS.
Connectors description in Seeeduino Lotus.
Lotus V1.1 specification
- Microcontroller: ATmega328P-MU 16 MHz
- Operating voltage: 5 V
- Current per I/O pin: 40 mA
- Flash memory: 32 kB
- RAM: 2 kB
- EEPROM: 1 kB
- Number of Grove connectors: 12
- Digital interfaces: D2, D3, D4, D5, D6, D7
- Analog interfaces: A0, A2, A4, A6
- Others: 2x I2C, SPI, UART
- Communication connector: microUSB
- Dimensions: 69 x 53 mm
Master module ideal for modular projects
Arduino compatible Lotus V1.1 board by Seeedstudio is a perfect proof of how modular approach to device development and testing dominates modern electronics.
Although the size and basic design of this board is reminiscent of popular Arduino Uno - it is based on the same ATMega328 processor and has the same PCB shape and layout of expansion connectors - Seeedstudio's proposal contains also 12 four-pin Grove standard connectors, allowing to connect various external modules.
Additional equipment
Lotus V1.1 - compatible with Arduino - Seeedstudio 102010168 contains up to five LEDs - two indicating communication status via built-in USB-UART converter, one power LED, RESET line status indicator and additional LED connected to PB5 line of microcontroller and dedicated to any user programming.
On the board there is of course built-in 3.3V regulator and hardware RESET button, known from the basic version offered by the Italian manufacturer. Clear descriptions of all lines and connectors perfectly facilitate work with the module and reduce the risk of errors.
Useful links |
