• EOL

E-paper E-Ink HAT 7,5'' 880x528px - shield with three-color display for Raspberry Pi - Waveshare 17960

Index: WSR-17480 EAN: 5904422345945

A 7.5" E-paper screen with a resolution of 880 x 528 px, which can display the image in three colors: red, black and white. It communicates through the SPI interface. This type of screens are characterized by a very low power consumption and wide viewing angle, it is used, among others, in e-books. A HAT cap for Raspberry Pi is also included.

E-paper E-Ink HAT 7,5'' 880x528px - shield with three-color display for Raspberry Pi - Waveshare...
€71.90
€58.46 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Waveshare
Compatibility: Raspberry Pi

Attention!

The product has been discontinued. Check other products in category.

Description: E-paper E-Ink HAT 7,5'' 880x528px - three-colour display cap for Raspberry Pi - Waveshare 17960.

A7.5"E-paper screen with a resolution of880 x 528 px, which can display the image in three colors: red, black and white. It communicates through theSPIinterface. This type of screens are characterized by a very low power consumption and wide viewing angle, it is used, among others, in e-books. The screen works with voltage of 3,3 V and 5 V. The set also includesa HAT capforRaspberry Pi.

The product is compatible withArduinoandRaspberry Pi.
The manufacturer provides auser guidefor Arduino and Raspberry Pi.

Nakładka w połączeniu z Raspberry PiOverlay in combination withRaspberry Pi, minicomputer can be purchased separately.

Main features of the E-paper display

  • The display has no backlighting, allows you to display the image even when it is not powered
  • Very low power consumption, power is only required for refreshing the image
  • Standard 40-pin outputs compatible with Raspberry Pi and Nvidia Jetson Nano
  • SPI interface that can be used to connect to other microcontrollers, e.g. Arduino module
  • Built-in voltage regulator, so it can work with 3.3 V or 5 V
  • The manufacturer provides auser manualwith examples for Raspberry, Jetson Nano, Arduino and STM32.

Module outputs

The module in the form of a HAT overlay for Raspberry Pi also has additional connectors that allow it to be used with other modules equipped with a microcontroller that supports SPI interface.

Pin Description
VCC Supply voltage: 3.3 V to 5 V.
GND The weight of the system.
DIN Pin MOSI SPI interface.
CLK SPI interface clock pin.
CS Chip select activated in a low state.
DC

Select data / commands.

High state - data

Low state - commands

RST External reset activated by low state.
BUSY Busy status output, activated by low status.

Wymiary modułu

Overlay dimensions.

Screen specification

  • Power supply voltage: 3.3 V / 5 V
  • The interface: 3-wire SPI / 4-wire SPI
  • External dimensions: 170.2 x 111.2 x 1.25 mm
  • Screen dimensions: 163.24 x 97.94 mm
  • Pixel size: 0.1855 x 0.1855 mm
  • Resolution: 880 x 528 px
  • Displayed colours: red, black, white
  • Gray scale: 2
  • Full refreshment time: 21 s
  • Power consumption at refreshment: 50 mW
  • Standby power consumption: up to 0.017 mW
  • Viewing angle: over 170°

The set includes

  • E-paper 7.5" screen
  • HAT overlay
  • Set of screws
  • 8-pin-20 cm cable
Screen - type e-paper
Screen - diagonal 7.5''
Screen - interface GPIO
Screen - touch no
Screen - resolution 880x528px
Package width 21 cm
Package height 5 cm
Package depth 15 cm
Package weight 0.149 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: