- EOL
|
Attention! The product has been discontinued. Check other products incategory. |
Product description: Raspberry Pi 4B aluminum enclosure with fan and screen - pi-top[4]DIY Edition
The housing is designed for theRaspberry Pi 4Bminicomputer. Pi-top[4]perfectly dissipates heat from the system thanks to the usedheatsinkwithfan. On its front there is a smallOLED display128 x 64 px with 4 buttons to navigate through the system interface. The chassis is equipped witha 1 W speakeranda battery, which ensures 5 hours of mini-computer operation without the main power supply. For proper operation it requires15 V / 30 Wpower supply via USB C port. The chassis requires self-assembly.
Pi-top enclosure[4]for Raspberry Pi 4B.Main features of the pi-top enclosure
- Emergency power supply- the housing is equipped with a rechargeable battery to keep the unit powered for 5 hours.
- Power management system- includes a secure shutdown system and UPS to prevent damage tothe microSD card.
- USB C Power Delivery- 15 V power supply for faster battery charging.
- Integrated cooling system- inside the enclosure there is a Raspberry Pi heat sink and a fan for best heat dissipation.
- Built-in display- the front of the case is equipped with a 128 x 64 px OLED screen and buttons. It can be used for diagnostics, IP address reading and configuration changes.
- Loudspeaker- the pi-top has a built-in 1W speaker that allows you to play audio from Raspberry Pi.
- Full access to connectors- the enclosure allows full access to all Raspberry Pi connectors, such as: GPIO, USB, microHDMI, Ethernet.
Pi-top case specification[4]
| Parameter | Value |
|---|---|
| Power supply | 15 V / 2 A (30 W) 12 V / 3 A (36 W) USB C PD |
| Battery | Built-in Li-Pol 7.4 V / 2600 mAh |
| Charging time | 1 h 15 min from 0% to 100% |
| Unloading time | 5 h for the pi-top alone[4] 2.5 h for the display and keyboard |
| Voltage | Min..: 6 V Nominal.: 7.4 V Max.: 8.4 V |
| Loudspeaker | 1 W, mono |
| Connections and interfaces | |
| USB C | For 12 V / 3 A or 15 V / 2 A supply |
| pi-top display port | HDMI and 5 V for the pi-top display |
| MicroHDMI | MicroHDMI port to connect the display |
| Audio connectors | Audio jack 3.5 mm 4-field TRRS |
| USB | 2x USB 3.0 and 1x USB 2.0 |
| CSI | CSI cable slot |
| Ethernet | Gigabit Ethernet RJ45 connector |
| 40 GPIO | Raspberry ports General Purpose Pi |
| Air ducts | For better airflow |
| MicroSD card slot | External card slot for Raspberry Pi |
| Weather interface | 8 pins with 5 V, UART and I2C |
| Programmable buttons | 4 x button |
| Display | Small monochrome screen OLED 128 x 64 px |
| Power switch | Allows you to switch on/off and reset the device |
| Status LEDs | They inform about power supply (red) and microSD card operation (green) |
Useful links |
