• EOL

Alphanumeric display 0,54'' 4-character - green - STEMMA QT / Qwiic - Adafruit 2160

Index: ADA-21914
Alphanumeric display by Adafruit, based on the HT16K33 controller. The diagonal of the display is 0.54'' , and the resolution is 4 characters (digits from 0 to 9, letters from A to Z) presented in green . There are additional 4 dots on the screen, which are located directly behind each segment. The module for communication uses a bidirectional I2C bus , has built-in STEMMA QT / Qwiic connectors for easy connection of the module without the need for soldering. Segments and connectors should be soldered into the board by yourself.
Alphanumeric display 0,54'' 4-character - green - STEMMA QT / Qwiic - Adafruit 2160
€22.90
€18.62 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Adafruit
Compatibility: Arduino Raspberry Pi

Attention!

The product has been discontinued. Check other products in category.

Product Description: 0.54'' 4-character alphanumeric display - green - STEMMA QT / Qwiic - Adafruit 2160

Alphanumeric display by Adafruit, based on the HT16K33 controller. The diagonal of the display is 0.54'' , and the resolution is 4 characters (digits from 0 to 9, letters from A to Z) presented in green . There are additional 4 dots on the screen, which are located directly behind each segment. The module for communication uses a bidirectional I2C bus , has built-in STEMMA QT / Qwiic connectors for easy connection of the module without the need for soldering. Segments and connectors should be soldered into the board by yourself.

The manufacturer has also prepared a detailed user guide - check it out!

0.54'' 4-character alphanumeric display - green - STEMMA QT / Qwiic - Adafruit 2160

0.54'' 4-character alphanumeric display - green - STEMMA QT / Qwiic - Adafruit 2160.

The board has leads in the form of solder pads and convenient STEMMA QT / Qwiic connectors.

The board has leads in the form of solder pads and convenient STEMMA QT / Qwiic connectors.

Pins of the segment display module

The module communicates with the microcontroller via the I2C interface, on the board you can also find 2 Qwiic / STEMMA QT connectors for quick connection to modules equipped with the same connector. The supply voltage is 3 V or 5 V.

  • VIO/VCC - supply voltage 3 V / 5 V
  • GND - system ground
  • SDA - data line of the I2C interface
  • SCL - clock line of the I2C interface

Display technical specification

  • Type: segmented
  • Driver: HT16K33
  • Number of digits: 4
  • Displayed symbols: letters from A to Z, numbers from 0 to 9
  • Additional symbols: 1x dot after each segment
  • Backlight color: green
  • Communication interface: I2C bus
  • I2C address: from 0x70 to 0x77 - selected with jumpers
  • Connectors: Qwiic / STEMMA QT, solder pads
  • Requires self-soldering
  • Backpack plate dimensions: 28 x 51 x 4 mm
  • Backpack plate weight: 5.5 g
  • Display dimensions: 21 x 25 x 14 mm
  • Display weight: 4.7g

Kit contents

  • Backpack tile - 1 piece
  • 2-digit segment display - 2 pieces
  • Golpin strip 5-pin raster 2.54 mm - 1 piece
The set requires self-assembly.

The set requires self-assembly.

Screen - type alphanumeric
Screen - interface I2C
Screen - touch no
Screen - resolution 4 cyfry
Package width 10 cm
Package height 13.5 cm
Package depth 3.5 cm
Package weight 0.019 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: