- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
The extending module in the form of shield for GPIO connectors of the minicomputer Raspberry Pi A+, B+ or 2B. It has, i.a. the OLED screen, buzzer, joystick, converter of USB-UART, RTC clock, analog-digital converter and many others. The kit also includes a DS18B20 temperature sensor.
The subject of the sale is a shield, minicomputer Raspberry Pican be purchased separately.
Key features
- The board is working withRaspberry Pi, version2 B , B+ and A+
- OLED screen with a diagonal of 0.96 " and a resolution of 128 x 64 px, enables you to view data, a system based on the SSD1306 controller
- Installed converter of USB - UART CP2102 allows you to communicate with the computer through a virtual serial port
- Analog-digital converter PCF8591 has 4 channels with 8-bit resolution
- On board is real time clock DS3231 with a slot forthe CR1220 batteries which must be purchased separately
- Thanks to expander PCF8574 on the I2C bus, the user can use the additional pins of I/O
- The embedded sensor BMP180 allows for pressure measurement,
|
A detailed description of the connection and use of the shield, can be found in the manufacturer's user manual. |
The distribution of elements on the board
- GPIO pins to connect to Raspberry Pi
- UART interface - for connecting the modules RS232, RS245, etc.
- Converter AC / CA - in the form of bolted connections
- The 1-Wire interface - for connecting devices of 1-Wire, for example,temperature sensor DS18B20 (included)
- Interface for connecting various sensors
- The OLED screen of 0.96 " - with SSD1306 driver, resolution of 128 x 64 px, SPI interface
- Buzzer
- Converter USB - UART - module CP2102
- 8-bit converter AC / CA - module PCF8591 with I2C interface
- Pressure sensor - BMP180 module with I2C interface
- Extension chip - module PCF8574 with I2C interface
- Real time clock - module DS3231 with I2C interface
- The LED indicating the power
- LED at the user's disposal
- Joystick
- The IR receiver - module LFN0038K
Set includes:
- Module Pioneer600 - extension board
- Cable USB - microUSB
- Temperature sensor DS18B20
- Mounting screws
The module does not containbattery CR1220. It must be purchased separately.
Useful links |
