- EOL
Attention! The product has been discontinued. Check other products in category. |
Description
Banana Pi M64 is a minicomputer equipped with2 GB of RAM, built-in driveEMMC 8GB Flash memory, 64-bit processorwith coreARM Cortex A53 1.2 GHz Quad Coreand connectors, i.a.:2x USB, gigabit Ethernet port, microSD slot, HDMI, Jack. Board has a40 pins of GPIOand interfaces: UART, I2C, SPI. Version M64 also has a built-inwi-fi module and Bluetooth 4.0. Built-in buttons: Reset, Power, Uboot andthe IR receiver are useful during the operation of the module.
This version is powered through the DC socket 1.6 x 4.4 mm . In our offer, you will find a special adapter.
Specification
- Processor: 64-bit
- Core: ARM Cortex-A53 quad-core
- Clock speed: 2 GHz
- RAM: 2 GB LP DDR3
- Memory EMMC Flash: 8GB
- Graphics: MALI-400 MP2 @ 500 MHz
- Integrated wi-fi 802.11 b/g/n (AP6212)
- Built-in Bluetooth BT4.0 (AP6212)
- Slot formemory microSD card
- HDMI 1.4 slot
- Audio, video Jack 3.5 mm
- Built-in microphone
- Ethernet port: 10/100/1000 Mbps (Realtek RTL8211E/D)
- 2 USB ports
- 40 pins of GPIO
- Interface for connectinga dedicated camera
- Built-in three buttons: Power, Reset, Uboot
- Built-in IR receiver
- Dimensions: 92 x 60 mm
- Power supply: 5 V / 2 A - DC connector 1.6 x 4.4 mm
- Weight: 45 g
The picture and sound
Banana Pi has a HDMI connector through which you can send picture and sound. In addition, the board has been equipped with a connector jack, to which you can connect headphones or output an analog video signal.
Operating system
Banana Pi has a built-in EMMC, it also uses a microSD memory card. The operating system can be uploaded via the computer with the reader. The operating system can be downloaded for free from the manufacturer's website.
Communication
Banana Pi has basic communication interfaces that can be found in office computers of PC class. In addition to the previously listed connectors of audio and video, the user has at his or her disposal:
- two USB ports, to which can be connected, for example, a mouse, a keyboard, a wi-fi card or USB flash drive. If you find that the slots are too short, you can increase their number using an external USB HUB.
- Ethernet connector, that is the ability to directly connect to the network.
- Bluetooth module- compatible with standard BT 4.0.
- the wi-fi module - the Banana Pi M3 has built-in wi-fi module with connector for external antenna.
- 40 x GPIO- outputs/inputs with general purpose that can be used to control the LEDs, buttons, drivers of engines. Among them are the pins supporting interfaces: I2C, SPI and UART.
- the pin for the camera -connector designed for the Banana PI camera.
Power
As a power source, the system uses the DC connector 1.6 x 4.4 mm, to which must be connected the 5 V power supply with performance of at least 2 A. In our assortment, you will find a special adapter.
Useful links |