- EOL
Attention! The product has been discontinued. Check other products in category. |
Description
BPi R2 is a router designed for home usage and for more complex configurations. Equipped with 2 GB of RAM and 8 GB of Flash eMMCmemory, CPU MediaTek MT7623M ARM® Cortex™-A7 MP Quad-Core 1.3 GHz and connectors: USB 3.0, slot formicroSD card, HDMI, infrared and Bluetooth BLE 4,1. Tile also has 28 GPIO pins, and communication interfaces UART, I2C, SPI, PWM, I2S. Thanks to the SATA connector, user can connect the disk. Built-in buttons: Reset, Power, U-boot and the IR receiver are useful during the operation on the module.
The router has 5 network sockets RJ45 operating in standard Ethernet 10/100/1000 Mbp and wi-fi module working in a standard 802.11 a/b/g/n, 802.11 ac/n WLAN, is also supported via port mini PCI-e. SATA connectors allow, in a simple way, to connect a hard drive. |
Specification
- CPU:MediaTek MT7623M ARM® Cortex™-A7 MP Quad-Core 1.3 GHz
- RAM: 2 GB DDR3
- Flash eMMCmemory: 8 GB (expandable)
- Graphic: Mali 450 MP4 GPU
- Integrated wi-fi802.11 a/b/g/nand Bluetooth 4.1 BLE modules
- Slot formemory cards microSD
- SATA connectors for connecting a 2.5 " HDD drive
- CSI connector for camera connection
- Built-in memory eMMC 8GB
- Fan Connector 5 V
- Connector 3.7 V to lithium battery
- HDMI slot
- Built-in microphone
- 5 ports RJ45 Ethernet10/100/1000 MB (4 x Gigabit LAN 1x Gigabit WAN)
- 2 ports USB 3.0
- 1 port USB 2.0 otg
- Input of power 12V / 2A DC
- 28 GPIO pins
- Embedded buttons: Power, Reset, U-boot
- Built-in IR receiver
- LEDs in red, green and blue
- Dimensions: 148 x 100.5 mm
- Weight: 100 g
Detailed information can be found onthe website of the manufacturer.
The picture and sound
Banana Pi has aHDMI port, through which you can send both picture and sound.
Operating system
Disk of Banana Pi is amemory card microSD.The operating systemcan be uploaded via the computer with the reader. Board supports m.in systems: Android, Android 5.1, Debian, Ubuntu and Raspbian. Installation guide of the system can be found atthis address.
Communication
Banana Pi has basic communication interfaces that can be found in office computers of PC class. In addition to the previously listed connectors for audio and video, the user has at his or her disposal:
- USB connectors, to which can be connected, for example, a mouse, a keyboard, a wi-fi card or USB flash drive. If you find that the slots are too short, you can increase their number usingan external USB HUB.
- 5 Ethernet slots, that is a possibility of a direct LAN connection10/100/1000 Mbps.
- the wi-fi module- built-in wi-fi module.
- 28 x GPIO- outputs/inputs with general purpose that can be used to control the LEDs, buttons, drivers of motors. Among them are the pins supporting interfaces: I2C, SPI and UART.
- SATA connector- to connect the drive.
Power
As a power source, the system uses the DC connector 12V 2A.Power supply is not included although, it is available in our offer.
Useful links |