- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description of product: a 3D Printer Zortrax Inventure
3D printer made by Zortraxis designed to print elements with dimensions135 x 135 x 130 mm. The size of the printer is405 x 350 x 345 mm. For printing it uses two nozzles, which alternately deposit the core material and the support material.The support material dissolves in water.
Zortrax Inventure has a system of soluble supports, a closed heating chamber and a HEPA filter. The printer uses special cartridges as the material for printing.
Key features of printer Zortrax Inventure
- Dual extruder- Inventure uses two filaments simultaneously: prints a single material model, and the second is a water-soluble support material.
- Closed print chamber in a fully controlled environment for 3D printing it provides working platformvirtually isolated from the environment.
- HEPAfiltercatches more than 99%free particles when printing, including less than 100 nm.
- Smart cartridges- Zortrax Inveture support material in the form of easily replaceable cartridges that inform about the type of material and its possible absence.
Soluble support materials for 3D printer
Zortrax Inventure uses three different types of support materials soluble in water:Z-SUPPORT, Z-SUPPORT Plus oraz Z-SUPPORT Premium. After completion of the printing process, the support material can be removed without having to manually split support structuresfrom the model.
Support materials for Zortrax Inventure
The printer uses three different materials, all water-soluble:Z-SUPPORT, Z-SUPPORT Plus i Z-SUPPORT Premium. All materials are biodegradable and do not require a solvent.
| Support | Model | Shelf working |
|---|---|---|
| Z-SUPPORT | FROM PETG | Build Tray (White) |
| FROM PLA | ||
| Z_SEMIFLEX | ||
| Z-SUPPORT Plus | Z-ULTRAT Plus | Build Tray Plus (Black) |
| Z-SUPPORT Premium | All filaments | Depending on filament |
Z-SUPPORT is compatible with standard build tray attached to Zortrax Inventure. Black Plus Build Tray is recommended for printing using Z-ULTRAT Plus due to the higher temperature of the press. Z-SUPPORT Premium is compatible with all base filaments, so the type of tray depends on the temperature of thebase filament print.
Z-SUPPORT
Soluble support material PVA is designed to operate at a temperature of approx. 180 °C. compatible with Z-PLA, Z-PETG and Z-SEMIFLEX.
Z-SUPPORT Plus
Material based on PVA is designed for printing at temperatures up to 245 °C. compatible with Z-ULTRAT Plus, filament based on ABS.
Z-SUPPORT Premium
Support material based on the BVOH. Works with any basic material for Zortrax Inventure, absorbs quickly and leaves no traces.
Software Z-SUITE 2
Z-SUITE 2 is a user-friendly software for preparing models for 3D printing using a wide range of tools and services.
- Intuitive processing model- download the 3D file and the program automatically converts it to a model ready to print.
- Detection of thin walls Z-SUITE 2 automatically detects too thin walls, which can make problems during the printing process.
- Many options for filling- various options for filling ensure reliability and reduce the material consumption.
- Overlay the models- faster production process, thanks to water-soluble supports. Many models can be superimposed in one print.
Materials available for Zortrax Inventure
Zortrax Inventure is compatible with all available materials for printers from the M series. The upgraded extruder allows you to print with more demanding filaments, for example, of type flex.
Z-SEMIFLEX
Semi-flexible thermoplastic, which bends without breaking under pressure. The material is perfect for the production of flexible parts.
Z-PETEG
Filament type PET, mixed with glycol to make it more durable and less vulnerable to cramp. It is resistant to acids, alkalis and oils.
Z-PLA
Eco-filament from biodegradable plastic. Recommended for printing complex models with lots of detail, as it has almost zero shrinkage factor.
Z-ULTRAT Plus
Based on ABS material, designed to reduce shrinkage and also to achieve better adhesion.
Specifications of 3D printer Zortrax Inventure
| Technical specification | |
|---|---|
| Power supply: |
110V / 5,9 @ 50 / 60 Hz 240 V / 2.5 A @ 50 / 60Hz |
| Maximum power: | 320 W |
| Print technology: | LPD Plus -advanced technology with a system of soluble supports |
| Workspace: | 135 x 135 x 130 mm |
| HEPA filter: | Yes |
| Link: | SD card (included) |
| Support structure: |
Instant - print from model material |
| Available materials: |
The model materials (Z-PETG, Z-PLA, Z-SEMIFLEX, Z-ULTRAT Plus) and support materials (Z-SUPPORT, Z-SUPPORT Plus) |
| The flow sensor material: |
Yes |
| Chip with information about the material (type, color, flow): |
Yes |
| Layer resolution: |
from 90 to 290 microns |
| The minimum optimal thickness of the walls: | 800 microns |
| The minimum thickness of the walls: | 400 microns |
| Permission point print: |
axis X/Y: 400 mm in axis: 90 - 200 micron |
| Positioning accuracy X / Y: | 1.5 microns |
| The positioning accuracy of the step axis Z: | 1.25 µm |
| Max print temperature (extruder): | 310 °C |
| Maximum chamber temperature: | 90°C |
| Heated chamber: | Yes |
| The room temperature of an operating device: | from 15°Cto 30°C |
| Storage temperature: | from 0°C to 35°C |
| Software package: | FROM SUITE 2 |
| Supported input file types: | .stl / .obj / .dxf / .3mf |
| Supported operating systems: | Mac OS X / Windows 7 and later |
| The format of the output file: | .ZCODEX |
| The size of the device: | 405 x 350 x 345 mm |
| The weight of the device: | 21 kg |
Set Zortrax Inventure contains
- 3D printer
- 2 cartridges (model and support material)
- SD card
- 5 trays
- Starter Kit
Useful links |
