- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Easy to use module for RFID reader (125 kHz) with USB interface. It works with systems from the series: ID-2, ID-3, ID-12 and ID-20.
To start the device, you must attach the selected RFID reader and connect the system to the computer via the miniUSB cable. The module is installed as a virtual COM port. When coapting the identifier, its ID will be displayed on the screen of any terminal with the settings of: 9600 bps 8N1. The reading of data is signaled by turning on the LED and audible alarm emitted by buzzer (it can be disabled by soldering the jumpers). A detailed description of the connection is in the instructions.
The module does not containRFID reader. It can be purchased separately. In our store, there is alsoa miniUSB cables.
Specification
- Interface: USB
- ID read indicators:
- Lighting - LED
- Sound - buzzer with the possibility of turning off
- Controller:FTDI
- The parameters for serial transmission:
- Speed: 9600 bps
- Data: 8-bit
- The lack of parity of bits
- Stop bit: 1
- Supported readers:ID-20, ID-12,ID-3, ID-2
- Dimensions: 36 x 31 x 15 mm
Video
The video shows how to connect RFID systems, conducted were also the range tests of RFID readers and identifiers from SparkFun.
The video, made by the SparkFun, introduces the capabilities of the product.
Useful links |
