- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Product description: MSX step-up converter! 5V 0.3A
Step-up converter with 5 V output voltage. The maximum current is 0.3 A. The controller operates with an input voltage of 0.65 V to 5 V. With this low input voltage, the module allows the electronics to be powered from asingle AA/AAA battery.
In practice, the system can be supplied with a voltage of up to 5.5 V, however, for values above 5 V, the same voltage will appear on the output as those given on the input, e.g. when supplying the system with 5.3 V, it will also set the output value to 5.3 V.
Outputs
The module has three outputs:
- VIN- input voltage from 0.65 V to 5 V.
- GND- ground potential
- VOUT- 5 V output voltage
The connectors are properly signed on the board. Outputs are 2.54 mm - popular connectorsgoldpin, allow the module to be mounted incontact plateorconnectionby means ofcables.
Specification of the MSX inverter
- Input voltage: 0.65 V to 5 V
- Output voltage: 5 V
- Maximum output current: 0,3 A
- Frequency of operation: 500 MHz
- Controller: MCP1640 chip
- Raster of exits: 2.54 mm
- Dimensions: 17 x 17 x 3 mm
- Weight (without connectors): 0.75 g
