- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D Printer - Creality Ender-3 S1 Pro
3D printer from Creality. It is a development of the Ender-3 S1 model. As in the basic version, we find a double Z-axis and efficien direct drive "Sprite" extruder, which is perfect for working with flexible filaments. The device is also equipped with a powerful 32-bit motherboard and a CR-Touch sensor to facilitate the leveling process. Additionally, the S1 Pro features a 4.3'' touchscreen display and LED lighting. The Pro version also allows a higher nozzle operating temperature: 300°C, which allows you to work with an even wider range of filaments. The working area of the 3D printer is 220 x 220 x 270 mm. The kit consists of partially assembled components, so assembly takes several minutes. The dimensions of the structure are 490 x 455 x 625 mm.
3D printer - Creality Ender-3 S1 Pro.
The"Sprite" direct drive extruder in the Creality Ender-3 S1 Pro.
Powerful direct drive extruder
The Ender-3 S1 Pro features a metal "Sprite" extruder based on a direct drive system. The manufacturer-designed two-speed extruder has two metal gears, operating at a gear ratio of 1:3.5. With a thrust force of up to 80 N, it ensures smooth filament feeding. The extruder construction is lighter than in standard direct drive solutions. The device is perfect for working with flexible thermoplastics (e.g. TPU). The S1 Pro model additionally has a higher nozzle operating temperature (300°C). It can be used to work with a wide range of filaments: PLA, ABS, Wood, TPU, PETG, PA.
CR-Touch Leveling Sensor
The Ender-3 S1 Pro is equipped with a 16-point CR-Touch leveling sensor. This solution is Creality's own design. It automates the leveling process of the 3D printer hotbed. The intelligent leveling system is easy to use. It enables automatic compensation of printing height in different points of the working table.
CR-Touch leveling sensor.
Dual Z-axisin Creality Ender-3 S1 Pro.
Dual Z-axis
The Ender-3 S1 Pro uses dual trapezoidal screws and Z-axis stepper motors. This solution provides a more stable and smoother operation. Coordinated operation of Z-axis drive elements reduces the risk of unwanted lines and bulges on the sides of the 3D printout. This improves the quality of finished 3D prints.
3D printer features to make your work easier
The Creality Ender-3 S1 Pro is equipped with a number of features that make the 3D printer user's job easier and safer. These should be mentioned first and foremost among them:
- Quiet 32-bit motherboard. During operation, its volume should not exceed 50 dB
- Simple assembly of the device. The 3D printer is 96% assembled. The final assembly involves only six simple steps, during which the main components of the printer must be connected together
- Convenient knob for adjusting the tension of the multiple V-ribbed belt
- Resume print after power failure
- Felt sensor, which allows the 3D printer to pause when it detects a missing or broken strand of print material
Filament sensorand print resume function.
Creality Ender-3 S1 Pro front view.
Additional features of the Ender-3 S1 Pro (compared to the S1 version)
- Increased working temperature of the nozzle (up to 300°C) and the working table (110°C), allowing to work with an even wider range of felts (PLA, ABS, Wood, TPU, PETG, PA)
- LED lighting, allowing to observe the process of print creation even in rooms with limited access to light
- PEI spring steel on the heating table
- Touch screen color display 4.3'' with user-friendly and intuitive menu
- Aesthetic changes to the front frame of the 3D printer
Summary of differences between Creality Ender-3 S1 and Ender-3 S1 Pro models
| Ender-3 S1 and Ender-3 S1 Pro - the differences | |||
|---|---|---|---|
| Model: | Ender-3 S1 | Ender-3 S1 Pro | |
| Nozzle temperature: | 260°C | 300°C | |
| Table temperature: | 100°C | 110°C | |
| Compatible Filaments: | PLA, TPU, PETG, ABS | PLA, ABS, Wood, TPU, PETG, PA | |
| Throat pipe type: | standard (with handle and plastic housing) | titanium (with handle and casing made of metal) | |
| Hotbed surface: | PC spring steel | PEI spring steel | |
| Display: | 4.3'' color (with knob) | 4.3'' color (touchscreen) | |
| Display sleep: | after 5 minutes of inactivity | after 3 minutes of inactivity | |
| Device dimensions: | 487 x 453 x 622 mm | 490 x 455 x 625 mm | |
| Weight: | 9.1 kg | 8.6 kg | |
Detailed specifications of Creality Ender-3 S1 Pro 3D printer
| Technical specification | |
|---|---|
| Printing method: | FDM |
| Print size: | 220 x 220 x 270 mm |
| Nozzle temperature: | 300°C |
| Table temperature: | 110°C |
| Nozzle diameter: | Standard: 0.4 mm |
| Printing accuracy: | +/- 0.1 mm |
| Print thickness: | 0.05 mm to 0.4 mm |
| Printing speed: | up to 150 mm/s |
| Supported Filament: | PLA, ABS, Wood, TPU, PETG, PA |
| Filament diameter: | 1.75 mm |
| Display: | 4.3'' LCD (touchscreen) |
| Extruder type: | Direct drive |
| Operating mode: | USB (USB Type-C), SD card |
| Supply voltage: | 220 to 240 V AC |
| Power: | 350 W |
| Printer dimensions: | 490 x 455 x 625 mm |
| Weight: | 8.6 kg |
