- Reduced price
Product description: Fibaro Roller Shutter 4 - intelligent Z-Wave Plus roller shutter controller - FGR-224
Fibaro Roller Shutter 4 is an advanced 230 V AC roller shutter controller that uses Z-Wave 800 technology, offering better communication range. The device is made of top-class materials that meet the highest quality standards. Fibaro RS4 not only allows for standard roller blind control, but also enables precise setting of the blind position and adjustment of the slat angle . The controller is also equipped with an energy measurement function , allowing you to control the energy consumption of the devices. Thanks to its compact dimensions, the controller easily fits into a standard electrical box. The installation and configuration process of the device is intuitive, and the use of push-in connectors eliminates the need to use additional quick connectors and electrical cubes . The FGR-224 module connects to the Yubii Home application using an innovative configuration wizard.
Fibaro Roller Shutter 4 requires a Z-Wave control panel for proper operation, which must be purchased separately.
Fibaro Roller Shutter 4 - intelligent Z-Wave Plus roller shutter controller - FGR-224.
Z-Wave roller shutter controller - Fibaro Roller Shutter 4.
Main features of the Fibaro Roller Shutter 4 roller shutter controller
- Based on the Z-Wave 800 system ensuring greater communication range.
- It allows you to raise and lower the blinds, as well as control the angle of the slats in the blinds.
- Works with all 230 V motors equipped with electronic or mechanical brakes.
- Simple grouping of devices and group control with one button.
- Automatic motor testing (up/down) and swapping button orientation and motor polarity, without the need to modify the wiring.
- Setting your favorite position of the blind or slats by double-clicking.
- Possibility to add a virtual end point.
- Equipped with push-in connectors, which allows installation without the need to use a screwdriver.
- A larger number of L and N connectors eliminates the need to use quick connectors or electrical cubes.
- Manufactured in Poland from the highest quality components.
- Compatible with control panels from other manufacturers.
Roller Shutter 4 energy consumption monitoring
Fibaro Roller Shutter 4 is a modern solution that allows you to control roller blinds or blinds as well as precisely monitor electricity consumption. Through the dedicated Yubii Home mobile application, it is possible to monitor the amount of energy consumed by electrical devices, both in real time and retrospectively for a specific period. This allows for full control over energy consumption.
Compatible with Yubii Home
The Fibaro Roller Shutter 4 controller works with the Yubii Home application, which is used to configure the device using a mobile device. A clear, user-friendly interface will guide you through the entire device configuration process step by step, without the need to use a computer or complicated programs.
General connection diagram of Fibaro Roller Shutter 4. 
The set with the roller shutter controller includes three cables to facilitate module installation.Fibaro Roller Shutter 4 controller specification
- Z-Wave chip: 800 series
- Z-Wave frequency: 868.4MHz, 868.42MHz, 869.85MHz
- Operating voltage: 100 V to 240 V AC ~ 50 / 60 Hz
- Maximum current (inductive load): 2 A
- Additional L and N connectors: yes
- Connector type: push-in
- Additional cables: included
- Device grouping: dedicated by application
- Double click: favorite item
- Virtual end point: yes
- Drive support: single-phase AC motors
- Number of supported drives: 1
- Mobile application: Yubii Home
- White color
Useful links |
