Product description: PA6 Neat filament 1.75 mm 0.75 kg - Black
Filament PA6 Neat by Spectrum for 3D printers in black in the form of a filament wound on spools. The diameter of the material is 1.75 mm , the net weight is 0.75 kg . The product is hermetically packed with a desiccant. The mounting hole diameter is 52 mm. The product requires a heated bed to properly form prints. Due to its chemical composition, the filament allows you to create prints with increased resistance to mechanical damage as well as with exceptional thermal properties, chemical resistance and corrosion resistance.
In our offer of filaments you will also find other materials and colors.
Filament PA6 Neat 1.75 mm 0.75 kg - Black
Features of the PA6 Neat filament
- Low processing shrinkage
- High temperature resistance up to 160 ° C for short-term operation (max. 200h)
- Very high temperature resistance up to 120 ° C for long-term operation (20000h)
- Thermal deformation temperature - HDT A 90 ° C (ISO 75)
- Water absorption less than 0.3%
- High creep resistance
- High hardness and stiffness of the manufactured elements
- Good tribological properties
- Chemical resistance to greases and oils
- Very strong layer lamination
Suggested filament printing parameters
| Printing temperature | 250 ° C to 280 ° C |
| Table temperature | from 60 ° C to 80 ° C |
| Print speed | From 30 mm / s to 70 mm / s |
| Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Color | Black |
| Printing temperature | From 30 mm / s to 70 mm / s |
| Table temperature | from 60 ° C to 80 ° C |
| Material density | 1.14 g / cm³ |
| Material | PA6 Neat |
| Spool outer diameter | 200 mm |
| Spool width | 67 mm |
| Mounting hole diameter | 52 mm |
| Package | Cardboard with print |
| Desiccant | Yes |
| Vacuum packing | Yes |
| Spool dimensions | 200 x 52 x 67 mm |
| Net weight | 0.75 kg |
