Product description: Filament PA6 GK10 1.75 mm 0.75 kg - Natural
Filament PA6 GK10 by Spectrum for 3D printers in a natural color in the form of a filament wound on spools. The diameter of the material is 1.75 mm , the net weight is 0.75 kg . The product is hermetically packed with a desiccant. The mounting hole diameter is 52 mm. The product requires a heated bed to properly form prints. Due to its chemical composition, the filament allows you to create prints with a low influence of moisture, temperature and good electrical insulating properties. Additionally, the fiber has a low linear contraction.
In our offer of filaments you will also find other materials and colors.
Filament PA6 GK10 1.75 mm 0.75 kg - Natural
Features of the PA6 GK10 filament
- High temperature up to 160 ° C for short-term operation (max. 200h)
- High temperature up to 120 ° C for long-term operation (20000h)
- Thermal deformation temperature - HDT A 90 ° C (ISO 75)
- Water absorption below 0.3%
- High creep resistance
- High hardness and stiffness of printed elements
- Chemical resistance
- Highly durable interlayer lamination
- High impact resistance
- Relatively high resistance to thermal aging
Suggested filament printing parameters
| Printing temperature | 260 ° C to 290 ° C |
| Table temperature | <80 c="" td=""> |
| Print speed | From 30 mm / sec to 80 mm / sec |
| Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Color | Natural |
| Printing temperature | From 30 mm / sec to 80 mm / sec |
| Table temperature | <80 c="" td=""> |
| Material density | 1.40 g / cm³ |
| Material | PA6 GK10 |
| Spool outer diameter | 200 mm |
| Spool width | 55 mm |
| Mounting hole diameter | 52 mm |
| Package | Cardboard with print |
| Desiccant | Yes |
| Vacuum packing | Yes |
| Spool dimensions | 200 x 52 x 55 mm |
| Net weight | 0.75 kg |
Filaments are hygroscopic, meaning they absorb moisture. Therefore, breaking the airtight vacuum packaging permanently reduces the quality and value of the product. For this reason, if an unpacked item is returned, the refund amount will be proportionally reduced. This does not apply to returns resulting from manufacturing defects in the material, such as damaged or cut filament. Please carefully check the color and material type on the label before opening the foil packaging.
Useful links |
