NTM PropDrive 28-26 1000kv / 315W BLDC motor
NTM PropDrive 28-26 1000kV / 315W BLDC motor
NTM PropDrive 28-26 1000kV / 315W BLDC motor
NTM PropDrive 28-26 1000kV / 315W BLDC motor
NTM PropDrive 28-26 1000kV / 315W BLDC motor
NTM PropDrive 28-26 1000kv / 315W BLDC motor - zdjęcie 1
NTM PropDrive 28-26 1000kV / 315W BLDC motor - zdjęcie 2
NTM PropDrive 28-26 1000kV / 315W BLDC motor - zdjęcie 3
NTM PropDrive 28-26 1000kV / 315W BLDC motor - zdjęcie 4
NTM PropDrive 28-26 1000kV / 315W BLDC motor - zdjęcie 5

Silnik BLDC NTM PropDrive 28-26 1000kV / 315W

Index: HBK-01566

Brushless motor (BLDC)NTM28-26A 1000kv without external shaft. The component is mounted directly to the rotating part of the motor housing with screws.

€23.02
€18.72 tax excl.

Unavailable
Discontinued product
30-day returns

Attention!

The sale of the product has been completed. Check other devices in this category.

Silnik BLDC PropDrive Series 2826 - 1000 kvSpecification

  • Model: NTM Prop Drive Series 2826 - 1000 kv
  • Speed: 1000 kv
  • Number of poles: 3
  • Maximum current: 21 A
  • Maximum power: 315 W (for 15 V)
  • Weight: 54 g
  • Power supply: Li-pol 3s (11.1 V) and 4s (14.8 V) batteries
  • Dimensions: 16 x 19 mm
  • Mounting screws: M3
  • Works with ESC 20 - 30A controllers
  • Connectors: 3.5 mm

Silnik BLDC ze sterownikiem silników bezszczotkowych

Parameters for 11.1 V supply (lipol 3S)

  • Power: 113 W
  • Power consumption: 10,2 A
  • Thrust: 0,632 kg

Parameters for 14.8 V supply (lipol 4S)

  • Power: 220 W
  • Power consumption: 14,9 A
  • Thrust: 0,937 kg

We also offer brushless motor controllers (ESC).

*kv - number of revolutions per 1 V supply voltage

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

Customers who bought this product also bought:

Brushless brushless motor (BLDC) driver Redox 20A

The Redox brushless motor controller is powered by a 2S-4S LiPo battery or 5-10 NiXX cells. Continuous current up to 20 A, instantaneous 25 A, BEC 3 A/5 V.
Index: MOD-01397
Index: MOD-01397
Available, 24h shipping!
(Check quantity)
Regular price €10.23 Price €10.23

Brushless brush driver Turnigy Multistar BLHeli OPTO 20A 2-4S

Brushless motor controller (BLDC) for current up to 20 A. The optimal power supply is the 2S - 4S li-pol packages (7.4 V to 14.8 V). It has the ability to connect the control...
Index: HBK-01572
Index: HBK-01572
Unavailable
Regular price €11.40 Price €11.40

Micro Maestro USB 6-channel servo driver - Pololu 1350

6-channel servo controller with support for digital and analog signals. The user has at his or her disposal, the control of the servos through: the PC app (USB), serial...
Index: PLL-00067
Index: PLL-00067
In stock, shipping 24 hours!
(Check quantity)
Regular price €18.58 Price €18.58

HP Motor with 298:1 Gear - doublesided shaft - Pololu 2218

Polol's miniature high-power motor with 298:1 gearbox, 100 rpm, 5.0 kg*cm (0.490 Nm) torque. It has an extended shaft for mounting speed sensors.
Index: PLL-00703
Index: PLL-00703
Available, 24h shipping!
(Check quantity)
Regular price €16.05 Price €16.05

MC33926 - two-channel 28V / 2.5A engine controller

MC33926 dual-channel DC motor controller for 5 to 28 volts. Maximum continuous output current per channel is 2.5 A.
Index: PLL-00751
Index: PLL-00751
Available, 24h shipping!
(Check quantity)
Regular price €27.67 Price €27.67

Raspberry Pi Model B 512MB RAM

Raspberry Pi Model B (512MB RAM) is a miniature computer that can successfully replace a large office device. The module allows you to process video in high definition. Has:...
Index: RPI-00972
Index: RPI-00972

Brushless Blueox (BLDC) Brushless Redox Driver 30A

The Redox brushless motor controller is powered by a 2S-4S LiPo battery or 5-10 NiXX cells. Continuous current up to 30 A, instantaneous 40 A, BEC 4A/5V. Software version 2.0.
Index: MOD-01398
Index: MOD-01398
Available, 24h shipping!
(Check quantity)
Regular price €10.67 Price €10.67

Power supply Extreme 2x USB 5V / 2.1A

Power supply with two USB type A outputs. Output coltage og 5 V, maximum output current of 2.1 A.
Index: ZAS-01462
Index: ZAS-01462
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.33 Price €5.33

Stepper engine 39BYGH405B 200 steps /rev 12V/0.4A/0.21Nm

Bipolar stepper motor, four-wire. Has a resolution of 200 steps per revolution (1.8 degrees). Powered by 12 V, draws 400 mA per coil. Holding torque is 2.14 kg*cm (0.21 Nm)....
Index: MOT-01472
Index: MOT-01472
Unavailable
Regular price €15.12 Price €15.12

Raspberry Pi Camera HD - camera for Raspberry Pi

Module with the camera connected to a corresponding connector of the minicomputer Raspberry Pi, version 3, 2, B+, A+ and older A and B. The device has a matrix with a...
Index: RPI-01613
Index: RPI-01613
Unavailable
Regular price €23.02 Price €23.02

Servo Redox L360 - standard

Standard servo. Speed: 0.14 sec/60 ° . The torque 4.1 kg*cm. Dimensions: 41 x 20 x 38 mm. Weight: 36 g.
Index: MOT-01685
Index: MOT-01685
Czas oczekiwania: ok. 10-30 dni
Regular price €4.63 Price €4.63

EMTEC micro SD / SDHC 8GB class 10 memory card with adapter

Popular MicroSD/SDHC format, used in smartphones, tablets, cameras. Product from Emtec. Class 10, read speed up to 20 MB/sec, write speed up to 15 MB/sec.
Index: KAP-01740
Index: KAP-01740
Unavailable
Regular price €6.95 Price €6.95

Products from the same category

DC Motor - Tamiya 980112M Mabuchi FA-130

Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.
Index: PLL-00138
Index: PLL-00138
Unavailable
Regular price €1.98 Price €1.98

Micro-Match connector - 10 pin socket

Micro-Match connector for 10-pin printing.
Index: UCC-00283
Index: UCC-00283
Unavailable
Regular price €0.21 Price €0.21

Micro-Match connector for 10-pin tape

Micro-Match connector on 10-vein tape with a pitch of 1.27 mm.
Index: UCC-00285
Index: UCC-00285
Unavailable
Regular price €0.91 Price €0.91

Pololu LPY550AL 2-axis XZ gyroscope

A sensor for measuring angular speed in two axes: XZ. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...
Index: PLL-00493
Index: PLL-00493
Unavailable
Regular price €15.12 Price €15.12

3-axis magnetometer, digital MAG3110

3-axis magnetometer in a small case DFN. Measuring range: ±1000 uT. Sensitivity at 0.1 uT. The communication interface is I2C bus.
Index: SES-00964
Index: SES-00964
Unavailable
Regular price €1.86 Price €1.86

HiTechnic color sensor - for Lego Mindstorms EV3 and NXT

The sensor together with the sensor and the intensity is vision Lego NXT robot. The sensor is able to distinguish between all colors including the colors of the blocks.
Index: ROB-00982
Index: ROB-00982
Unavailable
Regular price €55.58 Price €55.58

Servomechanism - Lego Mindstorms NXT

The servo can serve as the actuator of the robot. The device allows precise movement accurate to 1 degree.
Index: ROB-00986
Index: ROB-00986
Unavailable
Regular price €32.33 Price €32.33

USB Bluetooth adapter - Lego Mindstorms NXT

Adapter USB-Bluetooth allows the wireless exchange of data between computers, PC or Mac and the NXT device.
Index: ROB-00987
Index: ROB-00987
Unavailable
Regular price €39.30 Price €39.30

Gift voucher - PLN 50

Gift certificate worth PLN 50.
Index: BON-01044
Index: BON-01044
Unavailable
Regular price €11.63 Price €11.63

Gift Card - 300zł

Gift certificate worth PLN 300.
Index: BON-01045
Index: BON-01045
Unavailable
Regular price €69.77 Price €69.77

Receiver module GPS-FGPMMOPA6H GPS

Receiver module based on MT3339 chip in the surface soldered case - SMD. It has a built-in antenna and the possibility to connect the external version.
Index: UCC-01233
Index: UCC-01233
Unavailable
Regular price €23.23 Price €23.23

Bluetooth antenna ANT9520-245

Internal Bluetooth antenna, ZigBee, WLAN in SMD housing. Works on the frequency: 2.45 GHz in 200 MHz, 1.5 dBi band. Dimensions of the housing are 9.5 x 2.0 x 1.0 mm .
Index: SES-01263
Index: SES-01263
Unavailable
Regular price €0.58 Price €0.58