- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: Hotbed Control Module - for Creality CR-10 Max, CR-10S Pro V2, Ender-5 Plus 3D printers
HotbedControl Module- an original replacement component manufactured byCrealityfor use with 3D printers. It is compatible with Creality CR-10, CR-10S, CR-10minior CR-10S4, among others. It's a relay of sorts that allows you tocontrol the temperature of the heating table. It sends a pulse providing information that the hotbed should heat up. It also allows to set an appropriate temperature of the heating table. It has a built-in heatsink removing the excess heat. Hotbed Control Module from Creality can be used with the printers where the nominal table power is in the rangefrom 300 W to 850 W. Element should be powered with12 V or 24 V. Providing higher voltage may permanently damage the module. Also pay attention when connecting - Hotbed Control Module is not resistant to reverse polarity.
The module has three screw connectors, to which cables should be attached.
Technical specification of the module
- Original 3D printer component manufactured by Creality
- Type: Hotbed Control Module - module for controlling the Hotbed heating table
- Compatible with 3D printer: Creality CR-10, CR-10S, CR-10 mini, CR-10 S4, CR-10 S5, CR-10 Max, CR-10S Pro V2, Ender-5 Plus
- Application range (heating table power): from 300 W to 850 W
- Supply voltage 12 V / 24
- Connectors: 3 x screw connector
- Designations: V+, Vout, V-
- Additional elements: built-in heat sink
- Module dimensions: 55 x 38 x 25 mm
Attention!
Module cannot be used with power supply over 30 V. The product must be connected in accordance with the polarity. Its markings can be found on the module housing.
In our offer you will also find other original components for 3D printers produced byCreality. Remember that the use of original components and replacement parts increases the life of equipment and improves the efficiency of their work. We invite you to familiarize yourself with available components.
Useful links |