- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: Laser engraver / plotter Neje Master 2S MAX - 5,5 W - 460 x 810 mm
Nejelaser eng raving machine - Master 2S MAX model. It is equipped with a high quality laser module N40630 generating a beam of 440 nm wavelength. It works with such materials as wood, leather, plastic, rubber, among others. Working area of the device is 460 x 810 mm. Neje Master 2S MAX 5,5 W laser plotter communicates with a computer using a USB port. In addition, the device was equipped with a wireless control communication module.
Arrangement of components.
Special features of Neje Master 2S MAX
- Enables engraving and cutting on a wide range of materials thanks to a 40 W laser head
- The model is equipped with a 32-bit controller that allows engraving at speeds up to 1000 mm/s
- Large working area 460 x 810 mm
- Dedicated free apps for Windows, Mac, Android, iOS
- Bluetooth - wireless operation from your phone or computer
- Support for popular LightBurn and LaserGRBL software
- Simple design requiring no calibration or lubrication,
- Only 6 screws are needed to install the Neje Master 2S MAX laser engraver, and the entire assembly process requires no professional tools
- State-of-the-art head with intelligent controller to control temperature and regulate cooling
- Equipped with advanced laser module N40630
- Neje's product is also a laser engraving machine for metal, wood or leather and leather-like products
Engraving area
Neje Master 2S MAX has a large engraving area that is as large as 460 x 810 mm with a resolution of 6133 x 10800 pixels. The entire engraving process is extremely accurate. The dot spacing is 0.075 mm, which is about 339 dots per inch.
Advanced laser module
The Neje Master 2S MAX laser plotter is equipped with an advanced N40630 laser module. The laser beam is created by combining two high power laser diodes. The beam size is 0.05 x 0.05 mm. An extremely efficient and quiet fan is also installed near the module to dissipate the generated heat.
Laser construction.
All components shown in the picture are included in the kit with the Neje laser engraver.
Compatible materials
The Neje laser engraver allows you to create decorative designs, signatures and any other laser work. The device works with materials such as wood, plywood, mdf, hdf, leather and leather-like products, plastics, engraving laminate, textiles, anodized aluminum, coated metals and more. A complete list can be found here. The device cannot be used to engrave into reflective or transparent materials.
The kit includes
- Engraving machine NEJE 2S MAX 5,5 W - for self-assembly
- Laser module N40630
- Power supply 12 V 3 A
- Instruction manual
- Protective goggles
- USB cable
- Keys for assembly
- Material samples
- Useful accessories - including pen, brush, Allen wrench, etc.
Technical specification
- Type: Laser Engraver, Laser Plotter
- Model: Master 2S MAX
- Frame dimensions: 590 x 980 x 160 mm
- Frame material: aluminum profiles and composite elements
- Workspace dimensions: 460 x 810 mm
- Point spacing: 0.075 mm
- Resolution: 6133 x 10800 pixels
- Technology: High precision engraving
- Motor: Stepper motor
- Motor dimensions: 42 x 42 x 34
- MCU: 32-bit
- Maximum operating speed
- X axis: 1000 mm/s
- Y axis: 750 mm/s
- Software: NEJE + laserGRBL 1.1F
- Laser type: N40630
- Head power: 5,5 W
- Compatible lasers: N40630, A40630, A40640, N30820, N30610, B30635, A30100, F0100
- Laser head life: approximately 20,000 hours
- Wavelength: 440 nm
-
Power control: yes
- PWM: yes
- Wireless control: yes
- Wired connection: USB
- Supported formats: .bmp, .jpg, .jpeg, .png, .gif, .tif, .tiff, .tga, ai, .pdf, .sc, .dxf, .hpgl, .plt, .rd, .scpro2, .svg, .lbrn, .nc
Not sure what can be done with laser engraving? Practically anything!
Would a mini laser engraver be better? Check out the Neje DK-8-KZ laser engraving plotter - 1500 mW.
