- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D Printer - Creality Sermoon V1 Pro
3D printer with a workspace of 175 x 175 x 165 mm. The device is fully assembled and ready to use. It does not require a complicated process of leveling the work platform. It has a function of control from the application via WiFi network. The Sermoon V1 Pro does not generate excessive noise (the noise level during operation is about 45 dB). The printer has a closed casing. The Pro version additionally has an open door sensor and a camera. Its dimensions are 400 x 380 x 430 mm.
In the offer of our store there is also available a version of the printer with a model designation Creality Sermoon V1 (without the open door sensor and camera).
3D printer - Creality Sermoon V1 Pro.
Creality SermoonV1 Pro - 3D printer for beginners.
3D printer for beginners
Creality Sermoon V1 Pro is designed mainly for people who are just starting their adventure with 3D printing. The device does not require assembly, it is ready to use almost immediately after taking it out of the box and removing transport protection. In the case of this model, the user does not have to waste time on a complicated procedure of leveling the working table. A clear menu makes it easy to work with the device at every stage. Sermoon V1 Pro is the best 3D printer for beginners.
Convenient print nozzle replacement
The design solutions used in the Creality Sermoon V1 Pro allow for easy print nozzle replacement. Removal and reinstallation of this component is very simple and should not be difficult even for less experienced users. Maintaining proper nozzle patency improves the quality of the final 3D prints.
Design solutions make it easy to replace consumables.
Flexible work table overlay.
Easy removal of finished 3D models
The magnetic cap located on the workbench ensures good adhesion of the first layers of 3D prints. Thanks to its high flexibility, it also allows you to easily tear off finished models without damaging them.
Easy felt loading
In the Sermoon V1 Pro 3D printer, the manufacturer used an easy-to-use system for loading and retracting the printing material. It is operated by a single button, which significantly simplifies the process of changing the filament and removing any blockages.
The system of loading and reversing the printing material.
Remote control of the3D printer using the manufacturer's application.
Remote control using Cloud APP
With Creality Cloud APP, the user can remotely control the printing process. The presented version of the printer is equipped with a camera. Our offer also includes Creality Sermoon V1 model, which does not have the ability to preview the workspace.
Direct drive extruder
The filament feeding system in the Creality Sermoon V1 Pro is based on a direct drive extruder. It is characterized by its small size and high power. Dual gearing and high torque provide even and precise feeding of the print material.
Powerful extruder with a small size.
Aesthetic casing of Creality 3D printer.
Modern design and quiet operation
The dimensions of the Sermoon V1 Pro design are only 400 x 380 x 430 mm. At the same time, the device allows you to create quite large 3D prints with a maximum size of 175 x 175 x 165 mm. The printer's case has an interesting, modern design that will easily fit into the interior design of almost any room. Creality Sermoon V1 Pro is extremely quiet (about 45 dB), thus providing great comfort of work.
Working chamber door opening sensor
The Creality Sermoon V1 Pro, unlike the basic version of the printer, has an additional functionality in the form of a sensor of the working chamber door. In case of opening the door during 3D model forming, the work is stopped. It can be resumed only after closing the access to the workspace.
ThePro version of the Sermoon V1 printer has a door open sensor.
3D Printer Specifications - Creality Sermoon V1 Pro
| Technical Specification | |
|---|---|
| Printing method: | FDM |
| Supply voltage: | 200 V to 240 V (AC - mains) |
| Power: | 150 W |
| Nozzle diameter: | 0.4 mm |
| Supported Filament: | PLA, ABS, PETG |
| Filament diameter: | 1.75 mm |
| Print thickness: | 0.1 mm to 0.4 mm |
| Printing accuracy: | 0.1 mm |
| Display: | 4.3'' touchscreen |
| Operation mode: | WiFi, SD card |
| Supported files: | .stl, .obj, .amf |
| Supported slicers: | Creality Slicing Software, Cura, Repetier-Host, Simplify3D |
| Built-in camera: | yes |
| Open door sensor: | yes |
| Felt sensor: | yes |
| Resume function: | yes |
| Print size: | 175 x 175 x 165 mm |
| Nozzle temperature: | 250°C |
| Table temperature: | 80°C |
| Printer dimensions: | 400 x 380 x 430 mm |
| Weight: | 11.5 kg |
Useful links |
