- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Filament Rosa3D PVB 1.75 mm 0.5 kg - Smooth Black
The Rosa3D filament in black , wound on a spool, has a weight of 0.5 kg and a diameter of 1.75 mm . It is characterized by the ease of printing, which makes it an ideal solution for professionals as well as people who are just starting their adventure with 3D printing. Finished PVB prints can be smoothed with isopropyl alcohol . It allows you to obtain prints of very good quality and detail thanks to high adhesion between layers . The product is fully compatible with printers that are not equipped with locks that prevent the use of cartridges from third-party suppliers.
Rosa3D PVB filament 1.75 mm 0.5 kg - Smooth Black.
Finished PVB prints can be smoothed with isopropyl alcohol.
PVB properties
- With good adhesion between layers - allows for high accuracy of prints
- No threading effect
- Smooth finish
- Can be smoothed with isopropyl alcohol (IPA)
- Ease of printing
Suggested filament printing parameters
| printing temperature | From 200°C to 225°C |
| table temperature | From 65°C to 75°C |
| Print cooling | Recommended |
Due to the differences in the construction of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally.
Technical specification and physical properties of the Rosa3D PVB filament
| PARAMETER | RANGE |
|---|---|
| Filament diameter | 1.75mm |
| Color | Black |
| Material | PVB |
| head temperature | From 200°C to 225°C |
| table temperature | From 65°C to 75°C |
| Packaging | Printed cardboard |
| Desiccant | Yes |
| Vacuum packing | Yes |
| net weight | 0.5 kg |
