- EOL
Product description: 3D printer - Anycubic Photon Mono X 6Ks - resin
Anycubic resin printer equipped with a monochrome LCD display with a diagonal of 9.1 " , which allows you to obtain precise models with a very high resolution of 5760 x 3600 px ( 6K ). There is a protective film on the screen to protect against scratches and resin leakage. The set also includes an additional, replaceable film. A large working area with dimensions of 196 x 122 x 200 mm and a maximum volume of 4.76 L allows you to create unique, impressive prints.
3D printer - Anycubic Photon Mono X 6Ks - resin.
The device can create very detailed prints.
6K resolution
The 9.1" monochrome LCD screen with a resolution of 5760 x 3600 px (6K) guarantees the extraction of the smallest details from the model, and the high contrast ratio of 380: 1 provides it with extremely sharp and clear edges. The display is covered with a foil that protects it from scratches and resin penetration. The foil has a high level of light transmission.
Extensive working area
Anycubic Photon Mono X 6Ks allows you to create prints with a maximum size of 196 x 122 x 200 mm . The maximum print volume of the device is 4.76 L. Thanks to this, the printer can be used to form large printouts or several smaller ones at once.
Anycubic Mono X 6K workspace.
The LighTurbo matrix ensures efficient exposure of the cured resin.
UV LightTurbo light source
Thanks to the proprietary Anycubic LighTurbo matrix system and a precise optical lens, the intensity of UV light is evenly distributed over the model and solidly hardens it . An efficient source ensures a smooth surface, without visible lines of print layers, and also allows you to create a print much faster. Photon Mono X 6Ks can work at speeds up to 60 mm/h.
Double Z axis guides
The frame of the printer, constructed of solid and wear-resistant components , is a guarantee of the highest quality of printouts. Anycubic Photon Mono X 6Ks is equipped with double Z-axis rails that ensure stability, even when printing at high speeds. The construction is reinforced by POM nuts, which prevent loosening of the guides.
Z axis guide reinforced with POM nuts.
Thanks to the engraved work plate, the models will not slide off during printing.
Engraved work plate
Photon Mono X 6Ks is equipped with a working platform made of aluminum alloy. A checkerboard pattern was engraved on its surface. This provides much greater adhesion and stability of prints than in the case of a sandblasted platform. The engraved build plate reduces the risk of the printout peeling off or slipping off.
Other features of the Anycubic Photon Mono X 6Ks printer
- Removable cover that effectively protects against UV radiation
- 3.5 inch touch control panel
- Resin tank with scale
- Updated Anycubic Photon Workshop 3.0 slicer with user-friendly interface
- Manual leveling of the platform in 4 points
Printout created with Photon Mono X 6Ks.
Technical specification of the Anycubic Photon Mono X 6Ks 3D printer
| TECHNICAL SPECIFICATIONS | |
|---|---|
| Print Size: | 196 x 122 x 200mm |
| Print resolution: | 5760 x 3600 pixels (6K) |
| LCD screen type: | monochrome, 9.1'' |
| printing speed: | up to 60mm/h |
| Layer height: | from 0.1mm to 0.15mm |
| Contrast Ratio: | 380:1 |
| Software: | Anycubic Photon Workshop 3.0 |
| Communication: | USB |
| Printer dimensions: | 290x260x417mm |
| Mass: | 8.5 kg |
Useful links |
