- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description of product: SparkFun Qwiic Shield - Qwiic shield for Arduino Nano - SparkFun DEV-16789
SparkFun Qwiic Shield shield for Arduino Nano from SparkFun. The pin expander streamlines the Arduino prototyping process through the four connectors of the Qwiic ecosystem. Two ports are placed vertically in relation to the board, and two horizontally . The set also includes goldpin headers with a pitch of 2.54 mm, which have long pins. The headers should be self-soldered to the solder pads on the two long sides of the PCB.
SparkFun Qwiic Shield - Qwiic shield for Arduino Nano - SparkFun DEV-16789 - kit contents.
The product is compatible with Arduino Nano
The manufacturer has prepared a user guide to help you get started with the overlay. Check!
What is Qwiic?
Qwiic SparkFun is an ecosystem that includes a wide range of sensors based on the I2C bus, executive modules and dedicated cables. The main assumption of this solution is to improve the process of prototyping and connecting components. All elements supporting the Qwiic standard use the same connector - a 4-pin JST connector with a spacing of 1 mm. The use of such a solution reduces the amount of space required on the printed circuit board and prevents connection contrary to the polarity.
Technical specification of SparkFun Qwiic Shield
- Type: Arduino Shield
- Compatible Model: Arduino Nano
- Connector standard: Qwiic
- Qwiic ports: 4
- Arrangement: 2x vertically, 2x horizontally
- Logic switching circuit and IOREF jumper
- Communication interface: I2C bus
- Board outputs:
- GND - the ground of the system
- 3V3 - power supply pin 3.3 V
- 5V - 5V power pin
- Overlay dimensions: 43.18 x 17.78 mm
Kit contents
- SparkFun Qwiic Shield - Qwiic shield for Arduino Nano - 1 piece
- Goldpin headers - 2.54 mm raster - with long pins - 2 pieces
The ports have been arranged horizontally and vertically, which significantly expands the design possibilities.
