- On sale!
Product description: SparkFun Humidity Sensor Breakout - SHTC3 temperature and humidity sensor - Qwiic - SparkFun SEN-16467
SHTC3 temperature and humidity sensor manufactured by SparkFun. The SHTC3 system enables temperature measurement in the range from -40 ° C to 125 ° C with an accuracy of ± 0.2 ° C and humidity measurement in the range from 0% to 100% RH with an accuracy of ± 2% RH. SparkFun Humidity Sensor Breakout uses the I2C interface for communication purposes. The board is supplied with the voltage from 1.62 V to 3.6 V.
SparkFun Humidity Sensor Breakout - temperature and humidity sensor SHTC3 - Qwiic - SparkFun SEN-16467.
Characteristic features of the sensor
- Temperature and humidity measurement in a wide range and with high precision
- Low energy consumption mode, allowing for energy-saving use of the module
- Communication via the I2C interface via the Qwiic connector
- Compact dimensions of 25.4 x 25.4 mm
SHTC3 sensor module pins
The module with the SHTC3 temperature and humidity sensor communicates with the microcontroller via the I2C interface. The board is powered with the voltage from 1.62 V to 3.6 V. The connection can be made using solder pads or via the Qwiic connector.
- GND - the ground of the system
- 3.3V - supply voltage
- SDA - data line of the I2C interface
- SCL - clock line of the I2C interface
Technical specification of the module
- Module: temperature and humidity measurement sensor
- Built-in chip: SHTC3
- Operating voltage range: 1.62 V to 3.6 V (3.3 V via Qwiic connector)
- Power consumption:
- Normal mode: 4.9 uA to 430 uA
- Energy saving mode: from 0.5 uA to 270 uA
- Communication interface: I2C bus
- I2C address: 0x70
- Temperature measurement range: -40 ° C to + 125 ° C
- Typical reading accuracy: ± 0.2 ° C
- Measurement resolution: 0.01 ° C
- Relative humidity measurement range: 0% to 100% RH
- Typical reading accuracy: ± 2% RH
- Measurement resolution: 0.01% RH
- Leads: 2x Qwiic connector / solder pads
Temperature and humidity meter from SparkFun.
