Product description: Filament PA6 CF15 1.75 mm 0.75 kg - Black
Filament PA6 CF15 by Spectrum for 3D printers in black in the form of a filament wound on spools. The diameter of the material is 1.75 mm , the net weight is 0.75 kg . The product is hermetically packed with a desiccant. The mounting hole diameter is 52 mm. The product requires a heated bed to properly form prints. Due to its chemical composition, the filament allows you to create prints with high temperature resistance and mechanical strength. The characteristic advantage of this filament is the reduced moisture absorption by half compared to PA6 and the water absorption time is four times shorter.
In our offer of filaments you will also find other materials and colors.
Filament PA6 CF15 1.75 mm 0.75 kg - Black
Features of the PA6 CF15 filament
- Unusually low processing shrinkage
- High temperature resistance up to 180 ° C for short-term operation (max. 200h)
- High temperature resistance up to 150 ° C for long-term operation (20,000h)
- Thermal deformation temperature - HDT A 200 ° C (ISO 75)
- Water absorption less than 0.3%
- High mechanical strength
- Very strong layer lamination
- High creep resistance
- High hardness and stiffness of the manufactured elements
Suggested filament printing parameters
| Printing temperature | 260 ° C to 290 ° C |
| Table temperature | <80 c="" td=""> |
| Print speed | From 30 mm / s to 60 mm / s |
| Due to the differences in the design of printers, the above data should be treated as guidelines, and the appropriate values should be determined experimentally. |
Technical specification and physical properties of the filament
| Parameter | Range |
|---|---|
| Filament diameter | 1.75 mm |
| Filament dimensional tolerance | +/- 0.05 mm |
| Color | Black |
| Printing temperature | From 30 mm / s to 60 mm / s |
| Table temperature | <80 c="" td=""> |
| Material density | 1.25 g / cm³ |
| Material | PA6 CF15 |
| Spool outer diameter | 200 mm |
| Spool width | 55 mm |
| Mounting hole diameter | 52 mm |
| Package | Cardboard with print |
| Desiccant | Yes |
| Vacuum packing | Yes |
| Spool dimensions | 200 x 52 x 55 mm |
| Net weight | 0.75 kg |
