- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Display Seeed studio 5 " with a resolution of 720 x 1280 px with a wide-angle IPS. Works with Raspberry Pi in versions 3B+ 3B+ 2B, 1B+, 1B, 1A and Zero and Zero W via the HDMI and USB cable.
The screen is small, lightweight and easy to carry. Compatibile with most platforms with HDMI. In addition, the display has an adjustable backlight, which is controlled using the buttons located on the back.
Connect to the Raspberry Pi
In order to run screen, you must connect the device to a Raspberry Pi via the supplied wire: HDMI and microUSB. The screen works with the latest operating system Raspbian without the need to install drivers. However, in order that the screen displays the picture properly, you should change the resolution in the configuration file. To do this, open the file config.txt and then at the end add the following statements.
force_trubo=1
gpu_freq=300
core_freq=400
hdmi_pixel_freq_limit=400000000
hdmi_drive=2
hdmi_mode=87
disable_overscan=1
# 5 inch
hdmi_timings= 720 0 100 33 100 1280 0 20 2 30 0 0 0 60 0 79000000 0
max_framebuffer_width=1280
max_framebuffer_height=1280
display_rotate=1
framebuffer_width=1280
framebuffer_height=720
#
|
The screens are 5" and 7" can be supplied with the usual USB interface, while a 10.1" requires the current larger than the maximum supply current USB 2.0 (500 mA). It is recommended to use USB3 interface.0 or amobile phone charger or other USB power source that meets or exceeds 1A. |
Features
- Super slim
- High angle view
- High resolution
|
A series of screens from Seeed studio includes the following three products: Seeed studio screen IPS LCD 5" HDMI 720x1280px Seeed studio screen IPS LCD 7" HDMI 720x1280px Seeed Studio LCD display IPS 10.1" HDMI 1200x1980px |
Set includes
- 5" screen in black
- HDMI cable 2.0
- MicroUSB cable
Technical specification
| Option | Range |
|---|---|
| Diagonal | 5" |
| Resolution | 720 x 1280 |
| Update frequency | 60 HZ |
| The type of matrix | ISP with a wide-angle field of view |
| The number of colors | 262K |
| System colors | TFT Active Matrix |
| Driver IC | ILI9881C |
| Backlight | White LED 6*2 |
| Power supply | Via microUSB interface |
| Operating current | 5 V, 280 mA |
| Supported platforms |
Raspberry Pi,Windows,etc. HDMI interface |
| Interface |
HDMI2.0 (compatible with HDMI1.4) |
| Frame material |
Colored acrylic plate |
| Accessories |
Cable HDMI2.0 Micro USB cable |
| Features |
Very thin High angle view High resolution |
| Other functions |
Dimmer switch adjusting the brightness of the backlight |
Useful links |
