- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
Seeed studio 10.1" display with a resolution of 1200 x 1920 pixels with wide viewing angle IPS matrix. Works with Raspberry Pi in versions 3B+ 3B+ 2B, 1B+, 1B, 1A and Zero and Zero W via the HDMI and USB cable.
The screen is small, lightweight and easy to carry. Compatible with most platforms with HDMI. In addition, the display has an adjustable backlight, which is controlled using the buttons located at the back.
Connect to the Raspberry Pi
In order to run the screen, you must connect the device to a Raspberry Pi via the supplied wire: HDMI and microUSB. The screen works with the latest operating system Raspbian without the need to install drivers. However, in order for the screen to display the picture properly, you should change the resolution in the configuration file. To do this, open the file config.txt and then at the end add the following statements.
force_trubo=1
gpu_freq=300
core_freq=400
hdmi_pixel_freq_limit=400000000
hdmi_drive=2
hdmi_mode=87
disable_overscan=1
# 10,.1 inch
hdmi_timings=1200 0 100 24 52 1920 0 65 4 25 0 0 0 60 0 169000000 0
max_framebuffer_width=1920
max_framebuffer_height=1920
display_rotate=3
framebuffer_width=1920
framebuffer_height=1200
#
|
5" and 7" screens can be supplied with the usual USB interface, while a 10.1" requires the current larger than the maximum supply current USB 2.0 (500 mA). It is recommended to use USB3 interface.0 or a charger of the mobile phone or other USB power source that reaches or exceeds 1A. |
Features
- Super slim
- Wide viewing angle
- High resolution
|
A series of screens from Seeed studio includes the following three products: Seeed studio screen IPS LCD 5" HDMI 720x1280px Seeed studio screen IPS LCD 7" HDMI 720x1280px Screen Seeed Studio LCD display IPS 10.1" HDMI 1200x1980px |
Set includes
- Screen 10.1" in a black case
- HDMI cable 2.0
- Micro USB cable
- Rear support
- Mounting screws for Raspberry Pi
Technical specification
| Option | Range |
|---|---|
| Diagonal | 10,1" |
| Resolution | 1200 x 1920 |
| Update frequency | 60 HZ |
| The type of matrix | ISP with a wide-angle view |
| The number of colors | 16.7 M |
| System colors | TFT Active Matrix |
| Driver IC | ILI9881C |
| Backlight | White LED 6*2 |
| Food | Via microUSB interface |
| Operating current | 5v 600mA |
| Supported platforms |
Raspberry Pi, Windows,etc. HDMI interface |
| Interface |
HDMI2.0 (compatible with HDMI1.4) |
| Frame material |
Colored acrylic plate |
| Accessories |
Cable HDMI2.0 Micro USB cable |
| Features |
Very thin Wide viewing angle High resolution |
| Other functions |
Dimmer switch adjusting the brightness of the backlight |
Useful links |
