- EOL
Attention! The product has been discontinued. Check other products in category. |
Description: Filament Fiberlogy PETG 1.75 mm 0.85 kg - Black
PETG filamentwith a diameter of 1.75 in black.Used in printers using FFF/FDM technology. The unique properties of PETG allow it to be used in the production of, among others, handles and packaging. The product with a net weight of 850 giswoundona spool and vacuum packed. The filament is manufactured by Fiberlogy.
In our offer of filaments you will also find other materials and colors.
Properties of the PETG pillar
PETGfilamentis characterized by high resistance to chemicals (including salt and acids). It also shows high mechanical strength. Enrichment of the material withglycolincreases its impact resistance and reduces shrinkage. PETG does not require a closed working chamber during printing.
In this video, we explain the characteristics of the selected filaments in order to facilitate the selection of the type of filament to your expectations.
Suggested parameters of printing with a filament
Printing temperature | From 230°C to 250°C |
Table temperature | 90°C |
Cooling the printout | Recommended |
Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Specification of the Fiberlogy pillar
Parameter | Scope |
---|---|
Diameter of pillar | 1.75 mm |
Dimensional tolerances of the philanthropy | +/- 0,02 mm |
Colour | Black |
Printing temperature | From 230°C to 250°C |
Table temperature | 90°C |
Spool - material | PETG |
Reel diameter | 200 mm |
Reel width | 80 mm |
Mounting hole diameter | 52 mm |
Moisture absorber | Yes |
Vacuum packing | Yes |
Roundness | +/- 0.01 mm |
Packaging dimensions | 205 x 205 x 90 mm |
Net weight | 0.85 kg |
Charts of PETG filament properties.
Useful links |