- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: Filament Fiberlogy PETG 1,75 mm 0,85 kg - Graphite
Agraphite-colouredPETG filament, produced by Fiberlogy.PETG material is characterized by high mechanical and chemical strength. It is often used in the production of containers, packaging and decorative elements. The net weight of the filament wound on a spool is850 grams. The product is vacuum-packed.
In our offer of filaments you will also find other materials and colors.
Properties of the PETG pillar
Models made of PETGfilamentare characterized by high resistance to mechanical damage.Glycol, which is a component of this material, increases impact strength and reduces shrinkage. Moreover, PETG does not require a closed working chamber during printing. It shows high resistance to alkaline substances, acids and salts.
In this video, we explain the characteristics of the selected filaments in order to facilitate the selection of the type of filament to your expectations.
Suggested parameters of printing with a filament
| Printing temperature | From 230°C to 250°C |
| Table temperature | 90°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Specification of the Fiberlogy pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Graphite |
| Printing temperature | From 230°C to 250°C |
| Table temperature | 90°C |
| Spool - material | PETG |
| Reel diameter | 200 mm |
| Reel width | 80 mm |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Packaging dimensions | 205 x 205 x 90 mm |
| Net weight | 0.85 kg |
Charts of PETG filament properties.
Useful links |
