- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description: Filament Fiberlogy PETG 1,75 mm 0,85 kg - Gray
PETG filament of 1.75 mm diameter in grey.Designed for use inFFF/FDM printers. Models made with PETG material, characterized by high mechanical and chemical resistance. The manufacturer of printing material isFiberlogy. Filament of850 g netweight iswoundon a plastic spool. The product is vacuum packed and protected against moisture.
In our offer of filaments you will also find other materials and colors.
Properties of the PETG pillar
PETGfilamenthas a glycolwhichreduces shrinkage of the material and increases its impact strength. Objects made of PETG (containers,bottles,decorative elements) have high resistance to acids, salts and alkaline substances.
In this video, we explain the characteristics of the selected filaments in order to facilitate the selection of the type of filament to your expectations.
Suggested parameters of printing with a filament
| Printing temperature | From 230°C to 250°C |
| Table temperature | 90°C |
| Cooling the printout | Recommended |
| Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Specification of the Fiberlogy pillar
| Parameter | Scope |
|---|---|
| Diameter of pillar | 1.75 mm |
| Dimensional tolerances of the philanthropy | +/- 0,02 mm |
| Colour | Grey |
| Printing temperature | From 230°C to 250°C |
| Table temperature | 90°C |
| Spool - material | PETG |
| Reel diameter | 200 mm |
| Reel width | 80 mm |
| Mounting hole diameter | 52 mm |
| Moisture absorber | Yes |
| Vacuum packing | Yes |
| Roundness | +/- 0.01 mm |
| Packaging dimensions | 205 x 205 x 90 mm |
| Net weight | 0.85 kg |
Charts of PETG filament properties.
Useful links |
