- EOL
Attention! The product has been discontinued. Check other products in category. |
Description: Filament Fiberlogy PETG 1,75 mm 0,85 kg - White
White1.75 mm diameter PETG filament used inFFF/FDMprinters. It shows high mechanical and chemical resistance. Thanks to its properties it is used for production of packaging, bottles and decorative elements. The filmis woundon a spool. Its net weight is 0.85 kg. The product is vacuum packed.
In our offer of filaments you will also find other materials and colors.
Properties of the PETG pillar
PETG filtersare characterized by resistance to mechanical damage. They also show high resistance to chemicals, especially acids and salts.Glycol, which is a component of PETG material, ensures high impact strength and reduced shrinkage of the material. PETG does not require a closed working chamber during printing.
In this video, we explain the characteristics of the selected filaments in order to facilitate the selection of the type of filament to your expectations.
Suggested printing parameters of the filament
Printing temperature | From 230°C to 250°C |
Table temperature | 90°C |
Cooling the printout | Recommended |
Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Specification of the Fiberlogy pillar
Parameter | Scope |
---|---|
Diameter of pillar | 1.75 mm |
Dimensional tolerances of the philanthropy | +/- 0,02 mm |
Colour | White |
Printing temperature | From 230°C to 250°C |
Table temperature | 90°C |
Spool - material | PETG |
Reel diameter | 200 mm |
Reel width | 80 mm |
Mounting hole diameter | 52 mm |
Moisture absorber | Yes |
Vacuum packing | Yes |
Roundness | +/- 0.01 mm |
Packaging dimensions | 205 x 205 x 90 mm |
Net weight | 0.85 kg |
Charts of PETG filament properties.
Useful links |