- EOL
Attention! The product has been discontinued. Check other products in category. |
Description: Filament Fiberlogy PETG 1,75 mm 0,85 kg - Pure Transparent
Transparent PETG filament, produced by Fiberlogy.The material is characterized by high resistance to mechanical damage and the influence of chemicals. It is very often used to produce packaging, handles and decorative elements. The film is wound on a spool and packed hermetically. Net weight of the material for printing is 0.85kg.
In our offer of filaments you will also find other materials and colors.
Properties of the PETG filament
The PETG filamenthas a glycol compositionthatincreases impact strength and reduces shrinkage during printing. Thanks to increased impact resistance and the influence of salts, acids and alkaline substances, models made of PETG are used in prototyping in many areas of industry.
In this video, we explain the characteristics of the selected filaments in order to facilitate the selection of the type of filament to your expectations.
Suggested printing parameters of the filament
Printing temperature | From 230°C to 250°C |
Table temperature | 90°C |
Cooling the printout | Recommended |
Due to design differences between printers, the above data should be treated as a guide and the corresponding values should be determined experimentally. |
Specification of the Fiberlogy pillar
Parameter | Scope |
---|---|
Diameter of pillar | 1.75 mm |
Dimensional tolerances of the philanthropy | +/- 0,02 mm |
Colour | Transparent |
Printing temperature | From 230°C to 250°C |
Table temperature | 90°C |
Spool - material | PETG |
Reel diameter | 200 mm |
Reel width | 80 mm |
Mounting hole diameter | 52 mm |
Moisture absorber | Yes |
Vacuum packing | Yes |
Roundness | +/- 0.01 mm |
Packaging dimensions | 205 x 205 x 90 mm |
Net weight | 0.85 kg |
Charts of PETG filament properties.
Useful links |