- zdjęcie 1
- zdjęcie 2
- zdjęcie 3
- zdjęcie 4
- zdjęcie 5
- zdjęcie 6
- zdjęcie 7
- zdjęcie 8
- zdjęcie 9
- zdjęcie 10
- zdjęcie 11
- zdjęcie 12

Workshop Kit - Electro Guide

Index: NSZ-02321

A set of basic workshop tools for electronic-robotic engineer packed in an aesthetic, transparent box.

€17.65
€14.35 tax excl.

Unavailable
Discontinued product
30-day returns
Manufacturer: OEM

Attention!

The product has been discontinued. Check others products in category.

Description

The set includes the basic workshop equipment of every electronic and robotic engineer.

The film that represents the contents of the set.

 

Contents of the set

The kit includes:

 

L. p.PhotoDescription
1 Soldering iron with a power of 60 W - the basic device used for mounting the electronic circuits.
2 Tin in a vial - binder necessary for soldering - currently, we ship tin with a diameter of 1 mm.
3 Flux in gel, 1.4 ml - substance, thanks to which, after application, the soldering, even the small integrated circuits, becomes much more easier.
4 Pump for tin - a tool for desoldering the circuits and for removing the excess of tin.
5 Braid for the tin - copper ribbon which enables the separation of accidentaly soldered legs.
6 Stand for soldering iron - holder that allows you to comfortably put the soldering iron off, with the sponge for cleaning its tip.
7 Third hand - tool equipped with two handles with a magnifier, useful when there is no helping hand around.
8 Non-magnetic tweezers - allows you to keep, usually hot, integrated circuits during soldering.
9 Isolating tape - for connection and protection of wires, and not only for it.
10 Plastic xhest - a convenient container with a handle, in which will fit more than only items from this set.

Test 2

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
Terms of service
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia, The United Kingdom

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Terms of service
Kurier GLS - zone 3

Finland, Greece, Ireland, Liechtenstein, Serbia, Spain, Switzerland, Sweden

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN
Terms of service

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Terms of service
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Terms of service
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
Terms of service
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.
Send us your question

Be the first to ask a question about this product!

No customer reviews for the moment.

Customers who bought this product also bought:

Czujnik dymu i łatwopalnych gazów MQ-2

1000W remote control socket - 1 pc.

Mains socket 230 V with a power of 1000 W controlled remotely using a remote control. The device requires no installation, remote control supports up to 4 sockets with...
Index: ZAS-03697
Index: ZAS-03697
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.35 Price €8.35
Moduł MinIMU-9 - akcelerometr, żyroskop i magnetometr

AltIMU-10 v5 - gyroscope, accelerometer, compass and I2C 3-5V altimeter - Pololu 2739

Sensor for measuring acceleration, magnetic field, angular speed and altitude. It is a combination of 3-axis accelerometer and gyroscope LSM6DS33, LIS3MDL magnetometer and...
Index: PLL-05728
Index: PLL-05728
Czas oczekiwania ok. 10-21 dni
Regular price €20.44 Price €20.44
LSM303D 3-axis...

LSM303D 3-axis accelerometer + magnetometer IMU 6DoF I2C/SPI - - Pololu 2127

Sensor to determine acceleration and magnetic field. Measuring range is adjustable: accelerometer ±2 to ±16 g , magnetometer ±2 to ± 12 gaus . The digital...
Index: PLL-02036
Index: PLL-02036
Czas oczekiwania ok. 10-21 dni
Regular price €10.67 Price €10.67
Moduł MinIMU-9 - akcelerometr, żyroskop i magnetometr

BMA220 3-axis I2C digital accelerator - DFRobot module

Sensor for measuring acceleration in three axes in the range: ± 2 g, ±4 g, ±8 g / ±16 g. Powered with the voltage of 2.0 V to 3.6 V, it is characterized by small size, low...
Index: DFR-02987
Index: DFR-02987
Czas oczekiwania: ok. 10-30 dni
Regular price €4.64 Price €4.64
Arduino Uno - SMD

DFRobot Gravity - tilt sensor

A simple tilt sensor with digital output. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04279
Index: DFR-04279
Czas oczekiwania: ok. 10-30 dni
Regular price €1.84 Price €1.84
Pair of JST - BEC connectors for LiPol batteries

Pair of JST - BEC connectors for Li-Pol batteries

The set includes a pair of BEC (JST) connectors - socket, plug and plates.
Index: AKC-02865
Index: AKC-02865
Waiting time: about 10-30 days
Regular price €0.23 Price €0.23
9V battery clip (6F22)

Battery clip 9V (6F22)

A connector to facilitate the connection of popular 9-volt (6F22) batteries with cables with insulation removed at the ends.
Index: AKC-05502
Index: AKC-05502
Waiting time: about 10-30 days
Regular price €0.17 Price €0.17
5V / 3A DC 4.0x1.7mm power supply for Orange Pi

Power supply 5V / 3A DC 4.0x1.7mm for Orange Pi

Power supply with 4.0 x 1.7 mm DC Jack plug for Orange Pi series minicomputers. Maximum current capacity is 3.0 A.
Index: ORN-06501
Index: ORN-06501
Unavailable
Regular price €9.28 Price €9.28
Adapter SOT23 to DIP 6-pin...

Adapter SOT23 to DIP 6-pin - SparkFun BOB-00717

Adapter enables the connection of the chips in SMD SOT-23 cases to threaded output holes of DIP. It also allows you to connect circuits to a breadboard or connect with wires.
Index: SPF-01760
Index: SPF-01760
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.58 Price €0.58
SSOP adapter to 8-pin DIP -...

SSOP adapter to 8-pin DIP - SparkFun BOB-00497

Adapter enables the connection of the chips in SMD SSOP8 cases to threaded output holes of DIP 8 pin. It also allows you to connect circuits to a breadboard or connect with...
Index: SPF-01853
Index: SPF-01853
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.74 Price €1.74
Przejściówka SOIC na DIP 8-Pin - SparkFun

Adapter SOP to DIP 8-pin - 10pcs

Adapter for connecting circuits in SMD SOP8 cases to DIP 8 pin outputs. It also allows you to connect circuits in a breadboard or connect with wires.  Items are sold in sets of...
Index: PLY-02742
Index: PLY-02742
Czas oczekiwania: ok. 10-30 dni
Regular price €1.14 Price €1.14
Stacja lutownicza WEP 992D+ wielofunkcyjna pamięć ustawień/profili x3

Stacja lutownicza WEP 992D+ wielofunkcyjna pamięć ustawień/profili x3

The adapter facilitates the installation of the ESP-12 module on the breadboard. This set includes the goldpin connectors, 2.54 mm pitch for self-soldering.
Index: MOD-04351
Index: MOD-04351
Czas oczekiwania: ok. 10-30 dni
Regular price €0.45 Price €0.45

RandomCategoryProducts

Tamiya Mabuchi FA-130 engine

DC Motor - Tamiya 980112M Mabuchi FA-130

Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.
Index: PLL-00138
Index: PLL-00138
Unavailable
Regular price €1.98 Price €1.98
Micro-Match connector - 10 pin socket

Micro-Match connector - 10 pin socket

Micro-Match connector for 10-pin printing.
Index: UCC-00283
Index: UCC-00283
Unavailable
Regular price €0.21 Price €0.21
Connector Micro-Match to the ribbon 10 pin

Micro-Match connector for 10-pin tape

Micro-Match connector on 10-vein tape with a pitch of 1.27 mm.
Index: UCC-00285
Index: UCC-00285
Unavailable
Regular price €0.91 Price €0.91
LPR550AL 2-axis XY gyroscope

Pololu LPY550AL 2-axis XZ gyroscope

A sensor for measuring angular speed in two axes: XZ. It has a choice of measuring range: to ±500 °/sec, ±2000 °/sec. It has an integrated voltage regulator and analogue...
Index: PLL-00493
Index: PLL-00493
Unavailable
Regular price €15.12 Price €15.12
LSM303DLH 3D Akcelerometr + Kompas

3-axis magnetometer, digital MAG3110

3-axis magnetometer in a small case DFN. Measuring range: ±1000 uT. Sensitivity at 0.1 uT. The communication interface is I2C bus.
Index: SES-00964
Index: SES-00964
Unavailable
Regular price €1.86 Price €1.86
Lego Mindstorms NXT 2.0

HiTechnic color sensor - for Lego Mindstorms EV3 and NXT

The sensor together with the sensor and the intensity is vision Lego NXT robot. The sensor is able to distinguish between all colors including the colors of the blocks.
Index: ROB-00982
Index: ROB-00982
Unavailable
Regular price €55.58 Price €55.58
Lego Mindstorms NXT 2.0

Servomechanism - Lego Mindstorms NXT

The servo can serve as the actuator of the robot. The device allows precise movement accurate to 1 degree.
Index: ROB-00986
Index: ROB-00986
Unavailable
Regular price €32.33 Price €32.33
Lego Mindstorms NXT 2.0

USB Bluetooth adapter - Lego Mindstorms NXT

Adapter USB-Bluetooth allows the wireless exchange of data between computers, PC or Mac and the NXT device.
Index: ROB-00987
Index: ROB-00987
Unavailable
Regular price €39.30 Price €39.30
Gift voucher - PLN 50

Gift voucher - PLN 50

Gift certificate worth PLN 50.
Index: BON-01044
Index: BON-01044
Unavailable
Regular price €11.63 Price €11.63
Gift Certificate - 300 PLN

Gift Card - 300zł

Gift certificate worth PLN 300.
Index: BON-01045
Index: BON-01045
Unavailable
Regular price €69.77 Price €69.77
Moduł GPS GPS-GMS-U1LP

Receiver module GPS-FGPMMOPA6H GPS

Receiver module based on MT3339 chip in the surface soldered case - SMD. It has a built-in antenna and the possibility to connect the external version.
Index: UCC-01233
Index: UCC-01233
Unavailable
Regular price €23.23 Price €23.23
Bluetooth antenna ANT9520-245

Bluetooth antenna ANT9520-245

Internal Bluetooth antenna, ZigBee, WLAN in SMD housing. Works on the frequency: 2.45 GHz in 200 MHz, 1.5 dBi band. Dimensions of the housing are 9.5 x 2.0 x 1.0 mm .
Index: SES-01263
Index: SES-01263
Unavailable
Regular price €0.58 Price €0.58